ConQuest server performs C-MOVE on localhos

    Hello,
    I installed ComQuest at my develop computer an on a different machine in the local network. When I work on localhost, all kinds of communications with ComQuest do perfectly function (FIND, SEND, MOVE), but when I try to reach ComQuest on a different machine, I can though send images and perform queries, but when I try to carry out "MOVE", no images are returned, the status being "C003" (destination not found or allowed ).
    I imagine there is something wrong with the configuration, but what? Very thankful for all kind of tips!
    Alex
    PS. Can this be a firewall thing?

    Hi,


    c-move reverses the connection, so AE, IP and port of your local machine must be know to the remote one. And indeed, a firewall could block the reverse connection. Set up your local one in the remote and try to connect from the remote to the local; once that works you should be in business.


    Marcel

    I added


    MYAET 192.168.178.21 5678 un


    to the arcnema.map on the remote machine, where MYAET and the IP are the correct AET and IP of the local machine in the network. But what about the port? I have tried 5678 and 104, but none seem to work.
    Thanks, Alex

    Hallo Marcel and everybody,


    after checking all configuration parameters everything did work.
    It is essential that the PACS (as server) and a client application know each other, i.o.w. in the arcnema.map on the server there must be the data (AET, IP, port) of your client application, and in the configuration unit (depending on how a concrete application makes the bookkeeping - in my case it is a config file), there must be exactly the IP, port (5678 or so) and the AET of the ConQuest running on the server.
    I installed ConQuest on a remote server connected via VPN, and it works perfectly now.


    Alex

    Hello group,
    I am afraid I again need some assistance with the subtleties of the behavior of ConQuest in the C-MOVE mode.
    I have three ConQuests running: one on localhost, another one on a different computer in the local network, and still another one on a remote machine in the VPN network. The requesting application is in both local and VPN networks.
    I can successfully verify the VPN ConQuest instance.
    When I try to retrieve an image from those three instances of ConQuest, both local instances respond the request and send me the image. The remote VPN instance, however, responds "Host 'DKTECH' did not accept the connection" and, after a timeout, closes the connection. Trying a whole day, I was unable to understand the reason, or, the difference - the corresponding settings in the arcnema.map files on all three machines seem to be correct.


    I would be thankful for all tips,
    Alexander.


    ATTACHMENT: EXCERPT OF CONQUEST LOG-FILES
    ==========================================
    # ConQuest on localhost
    #========================
    [CONQUESTSRV1] UPACS THREAD 5: STARTED AT: Thu Oct 27 19:02:21 2016
    [CONQUESTSRV1] Calling Application Title : "DKTECH "
    [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
    [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 65536
    [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1
    [CONQUESTSRV1] C-Move Destination: "DKTECH"
    [CONQUESTSRV1] Number of Images to send: 1
    [CONQUESTSRV1] Sending file : C:\dk\thirdparty\dicomserver1417d\data\images\DJnnr19500510_54\1.2.826.0.1.3680043.9.5458.1003.20160903123051321.9733_0003_000003_14728986510002.dcm
    [CONQUESTSRV1] C-Move (StudyRoot)
    [CONQUESTSRV1] UPACS THREAD 5: ENDED AT: Thu Oct 27 19:02:29 2016
    [CONQUESTSRV1] UPACS THREAD 5: TOTAL RUNNING TIME: 8 SECONDS


    # ConQuest on another computer in local network
    #==============================================
    [CONQUESTSRV2] UPACS THREAD 207: STARTED AT: Thu Oct 27 19:19:30 2016
    [CONQUESTSRV2] Calling Application Title : "DKTECH "
    [CONQUESTSRV2] Called Application Title : "CONQUESTSRV2 "
    [CONQUESTSRV2] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 65536
    [CONQUESTSRV2] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1
    [CONQUESTSRV2] C-Move Destination: "DKTECH"
    [CONQUESTSRV2] Number of Images to send: 1
    [CONQUESTSRV2] Sending file : C:\Dktech\ConQuest\Data\Images\DJnnr19500510_54\1.2.826.0.1.3680043.9.5458.1003.20160903131355398.4152_0003_000001_14729012380000.dcm
    [CONQUESTSRV2] C-Move (StudyRoot)
    [CONQUESTSRV2] UPACS THREAD 207: ENDED AT: Thu Oct 27 19:20:16 2016
    [CONQUESTSRV2] UPACS THREAD 207: TOTAL RUNNING TIME: 46 SECONDS


    # ConQuest on a remote host (VPN network)
    #=========================================
    [STRATO] UPACS THREAD 126: STARTED AT: Thu Oct 27 19:00:07 2016
    [STRATO] Calling Application Title : "DKTECH "
    [STRATO] Called Application Title : "STRATO "
    [STRATO] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 65536
    [STRATO] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1
    [STRATO] C-Move Destination: "DKTECH"
    [STRATO] Number of Images to send: 1
    [STRATO] Host 'DKTECH' did not accept the connection
    [STRATO] C-Move (StudyRoot)
    [STRATO] UPACS THREAD 126: ENDED AT: Thu Oct 27 19:00:28 2016
    [STRATO] UPACS THREAD 126: TOTAL RUNNING TIME: 21 SECONDS

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login