Problems with MPEG2MainProfileAtMainLevel transfer syntax

    When sending or importing a dicom file, Conquest gives some errors on the transfer syntax. Below more information regarding this issue.


    Dicom header tag
    (0002,0002) UI #32 [1.2.840.10008.5.1.4.1.1.77.1.1.1] Media Storage SOP Class UID
    (0002,0003) UI #56 [1.2.826.0.1.3680043.2.1118.2013967575.1104.1290023264.4] Media Storage SOP Instance UID
    (0002,0010) UI #24 [1.2.840.10008.1.2.4.100] Transfer Syntax UID
    (0002,0012) UI #22 [1.2.250.1.59.3.0.3.5.3] Implementation Class UID
    (0008,0005) CS #10 [ISO_IR 100] Specific Character Set
    (0008,0008) CS #16 [ORIGINAL\PRIMARY] Image Type
    (0008,0016) UI #32 [1.2.840.10008.5.1.4.1.1.77.1.1.1] SOP Class UID


    I'm using Conquest version 1.4.16g


    Added into the dgatesop.lst
    MPegSop 1.2.840.10008.5.1.4.1.1.77.1.1.1 sop
    MPEG2MainProfileAtMainLevel 1.2.840.10008.1.2.4.100 transfer LittleEndianExplicit


    The result when trying to import the dicom file in debug mode


    ------------ Adding image files to server -----------
    [CQ] Connected by address: 0100007f
    [CQ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
    [CQ] 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"
    [CQ] 0000,0100 2 US CommandField 48
    [CQ] 0000,0110 2 US MessageID 7
    [CQ] 0000,0800 2 US DataSetType 257
    [CQ] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
    [CQ] 9999,0400 108 LO ConquestConsoleComma "addimagefile:D:\\dicomserver1416\\VVe_1.2.826.0.1.3680043.2.1118.2013967575.1104.1290023264.4.dcm"
    [CQ] ***Unknown transfer syntax in 00080000
    [CQ] ***[AddImageFile] D:\dicomserver1416\VVe_1.2.826.0.1.3680043.2.1118.2013967575.1104.1290023264.4.dcm -FAILED: Error on Load
    -----------------------------------------------------


    The result when trying to send to Conquest in debug mode


    [CQ] UPACS THREAD 6: STARTED AT: Fri Oct 14 15:28:05 2011
    [CQ] *** connection terminated
    [CQ] UPACS THREAD 6: ENDED AT: Fri Oct 14 15:28:05 2011
    [CQ] UPACS THREAD 6: TOTAL RUNNING TIME: 0 SECONDS
    [CQ] Connected by address: 0100007f
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #0 = '1.2.840.10008.1.2'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #1 = '1.2.840.10008.1.2.1'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #2 = '1.2.840.10008.1.2.2'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #3 = '1.2.840.10008.1.2.4.50'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #4 = '1.2.840.10008.1.2.4.51'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #5 = '1.2.840.10008.1.2.4.52'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #6 = '1.2.840.10008.1.2.4.53'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #7 = '1.2.840.10008.1.2.4.54'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #8 = '1.2.840.10008.1.2.4.55'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #9 = '1.2.840.10008.1.2.4.56'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #10 = '1.2.840.10008.1.2.4.57'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #11 = '1.2.840.10008.1.2.4.58'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #12 = '1.2.840.10008.1.2.4.59'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #13 = '1.2.840.10008.1.2.4.60'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #14 = '1.2.840.10008.1.2.4.61'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #15 = '1.2.840.10008.1.2.4.62'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #16 = '1.2.840.10008.1.2.4.63'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #17 = '1.2.840.10008.1.2.4.64'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #18 = '1.2.840.10008.1.2.4.65'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #19 = '1.2.840.10008.1.2.4.66'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #20 = '1.2.840.10008.1.2.4.70'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #21 = '1.2.840.10008.1.2.4.80'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #22 = '1.2.840.10008.1.2.4.81'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #23 = '1.2.840.10008.1.2.5'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #24 = '1.2.840.10008.1.2.1.99'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #25 = '1.2.840.10008.1.2.4.90'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #26 = '1.2.840.10008.1.2.4.91'
    [CQ] Testing transfer: '1.2.840.10008.1.2.4.100' against list #27 = '1.2.840.10008.1.2.4.100'
    [CQ]
    [CQ] UPACS THREAD 7: STARTED AT: Fri Oct 14 15:29:16 2011
    [CQ] *** connection terminated
    [CQ] UPACS THREAD 7: ENDED AT: Fri Oct 14 15:29:16 2011
    [CQ] UPACS THREAD 7: TOTAL RUNNING TIME: 0 SECONDS

    Hi,


    a transfer syntax (like jpeg) has to be programmed in to work. This one isn't. So I am afraid you cannot load images like this by drag and drop. The sending server should decompress the images, however, if you send them over a dicom connection. No easy solution for this.


    Marcel

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login