I have dcm images (2256x2878)
They are really toooo big.
Is there any chance to resize this images to 800x600 (or other size) via importing into the conquest server??
If there is no chance to do that ...do you have any hint which software i can use for resizing this images.
Please answer!!
Very best regards from Lodda
Hi Lodda,
The easiest is to use compression k1 (max 1024), k2 (max 512), k4 (max 256) etc. You can configure this in dicom for images that are dropped and recieved and in acrnema.map for images that are sent.
Marcel
has anyone tried k1 -k4 compression lately? i cant get it resize huge image size via incoming or drop.
How configured?
Marcel
Hi,
I just set:
# Configuration of compression for incoming images and archival
DroppedFileCompression = k4
IncomingCompression = k4
Restarted the (1.4.17c) server and dropped some 1024x1024 images. The images were stored as 256x256.
Can you specify the issue in more detail?
Marcel
i tested a cr file and it worked fine...i'm testing it on huge SC modality that is paperwork scanned to a uncompressed dcm file...res is 2538x3299 and it just saves it as 24MB file???
0 # 2 PlanarConfiguration
(0028,0010) US 3297 # 2 Rows
(0028,0011) US 2535 # 2 Columns
(0028,0100) US 8 # 2 BitsAllocated
(0028,0101) US 8 # 2 BitsStored
(0028,0102) US 7 # 2 HighBit
(0028,0103) US 0 # 2 PixelRepresentation
(7fe0,0000) UL 25073694 # 4 PixelDataGroupLength
(7fe0,0010) OW (not loaded) # 25073686 PixelData
using drop
------------ Adding image files to server -----------
[CONQUESTSRV1] Connected by address: 0100007f
[CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[CONQUESTSRV1] 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"
[CONQUESTSRV1] 0000,0100 2 US CommandField 48
[CONQUESTSRV1] 0000,0110 2 US MessageID 7
[CONQUESTSRV1] 0000,0800 2 US DataSetType 257
[CONQUESTSRV1] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
[CONQUESTSRV1] 9999,0400 108 LO ConquestConsoleComma "addimagefile:C:\\1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930660.758_999999_000003_1390930671210e.dcm"
[CONQUESTSRV1] Query Tables: DICOMImages
[CONQUESTSRV1] Columns : ObjectFile, DeviceName
[CONQUESTSRV1] Where : SOPInstanc = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930668.761' AND ImagePat = ''
[CONQUESTSRV1] Order : (null)
[CONQUESTSRV1] Query Tables: DICOMImages
[CONQUESTSRV1] Columns : SOPInstanc,SOPClassUI,ImageNumbe,ImageDate,ImageTime,EchoNumber,NumberOfFr,AcqDate,AcqTime,ReceivingC,AcqNumber,SliceLocat,SamplesPer,PhotoMetri,Rows,Colums,BitsStored,ImageType,ImageID,ImagePat,SeriesInst
[CONQUESTSRV1] Where : SOPInstanc = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930668.761' AND ImagePat = '
[CONQUESTSRV1] Order : (null)
[CONQUESTSRV1] Update Table: DICOMImages
[CONQUESTSRV1] Updates : SOPInstanc = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930668.761', SOPClassUI = '1.2.840.10008.5.1.4.1.1.7', ImageNumbe = '3', ImageDate = '20140128', ImageTime = '123747', SamplesPer = '3', PhotoMetri = 'RGB', Rows = '3297', Colums = '2535', BitsStored = '8', ImagePat = '', SeriesInst = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930660.758', AccessTime = 1390931488, ObjectFile = '235566\1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930660.758_999999_000003_13909307910000.v2', DeviceName = 'MAG0'
[CONQUESTSRV1] Where : SOPInstanc = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930668.761' AND ImagePat = ''
[CONQUESTSRV1] Query Tables: DICOMSeries
[CONQUESTSRV1] Columns : SeriesInst,SeriesNumb,SeriesDate,SeriesTime,SeriesDesc,Modality,PatientPos,ContrastBo,Manufactur,ModelName,BodyPartEx,ProtocolNa,StationNam,Institutio,FrameOfRef,SeriesPat,StudyInsta
[CONQUESTSRV1] Where : SeriesInst = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930660.758' AND SeriesPat = ''
[CONQUESTSRV1] Order : (null)
[CONQUESTSRV1] Update Table: DICOMSeries
[CONQUESTSRV1] Updates : SeriesInst = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930660.758', SeriesNumb = '999999', SeriesDate = '20140128', SeriesTime = '123740', SeriesDesc = 'Paper Series', Modality = 'SC', Manufactur = Test.', ModelName = 'Dicom Printer 2', SeriesPat = '235566', StudyInsta = '1.3.12.2.1107.5.1.4.32568.3000000101076201401281229', AccessTime = 1390931488
[CONQUESTSRV1] Where : SeriesInst = '1.2.826.0.1.3680043.2.1635.0.2336235503.1308.1390930660.758' AND SeriesPat = ''
[CONQUESTSRV1] Query Tables: DICOMStudies
[CONQUESTSRV1] Columns : StudyInsta,StudyDate,StudyTime,StudyID,StudyDescr,AccessionN,ReferPhysi,PatientsAg,PatientsWe,StudyModal,PatientNam,PatientBir,PatientSex,PatientID
[CONQUESTSRV1] Where : StudyInsta = '1.3.12.2.1107.5.1.4.32568.3000000101076201401281229'
[CONQUESTSRV1] Order : (null)
Hi
can you post a bit more from the header showing the color information?
Marcel
ive tried RGB MONOCHROME8 and 12
0008,0016) SOPClassUID UI # 26 1 [1.2.840.10008.5.1.4.1.1.7]
(0008,0018) SOPInstanceUID UI # 60 1 [1.2.826.0.1.3680043.2.1635.0.1385705735.3292.1390843953.488]
(0008,0020) StudyDate DA # 8 1 [20140127]
(0008,0021) SeriesDate DA # 8 1 [20140127]
(0008,0023) ContentDate DA # 8 1 [20140127]
(0008,0030) StudyTime TM # 6 1 [123034]
(0008,0031) SeriesTime TM # 6 1 [123230]
(0008,0033) ContentTime TM # 6 1 [123233]
(0008,0050) AccessionNumber SH # 6 1 [100988]
(0008,0060) Modality CS # 2 1 [SC]
(0008,0064) ConversionType CS # 2 1 [SI]
(0008,0070) Manufacturer LO # 10 1
(0008,0080) InstitutionName LO # 0 0 []
(0008,0090) ReferringPhysiciansName PN # 12 1
(0008,1010) StationName SH # 0 0 []
(0008,1030) StudyDescription LO # 20 1 ]
(0008,103e) SeriesDescription LO # 12 1 [Paper Series]
(0008,1040) InstitutionalDepartmentName LO # 0 0 []
(0008,1050) PerformingPhysiciansName PN # 0 0 []
(0008,1090) ManufacturerModelName LO # 16 1 [Dicom Printer 2 ]
(0010,0010) PatientName PN # 16 1
(0010,0020) PatientID LO # 6 1 [5]
(0010,0030) PatientBirthDate DA # 8 1 []
(0010,0040) PatientSex CS # 2 1 []
(0018,0015) BodyPartExamined CS # 0 0 []
(0018,1000) DeviceSerialNumber LO # 36 1 [3D2569F7-6064-323A-0003-D58378EF308F]
(0018,1010) SecondaryCaptureDeviceID LO # 36 1 [3D2569F7-6064-323A-0003-D58378EF308F]
(0018,1012) DateOfSecondaryCapture DA # 8 1 [20140127]
(0018,1014) TimeOfSecondaryCapture TM # 6 1 [123216]
(0018,1016) SecondaryCaptureDeviceManufacturer LO # 10 1
(0018,1018) SecondaryCaptureDeviceManufactur... LO # 16 1
(0018,1019) SecondaryCaptureDeviceSoftwareVe... LO # 10 1 [2.1.7.445 ]
(0018,1020) SoftwareVersion LO # 10 1 [2.1.7.445 ]
(0020,000d) StudyInstanceUID UI # 52 1 [1.3.12.2.1107.5.1.4.32568.3000000100988201401271229]
(0020,000e) SeriesInstanceUID UI # 60 1 [1.2.826.0.1.3680043.2.1635.0.1385705735.3292.1390843950.485]
(0020,0010) StudyID SH # 16 1 [1098914012726555]
(0020,0011) SeriesNumber IS # 6 1 [999999]
(0020,0013) InstanceNumber IS # 2 1 [3]
(0020,0020) PatientOrientation CS # 4 2 [A\R]
(0020,0060) Laterality CS # 0 0 []
(0028,0002) SamplesPerPixel US # 2 1 [3]
(0028,0004) PhotometricInterpretation CS # 4 1 [RGB]
(0028,0006) PlanarConfiguration US # 2 1 [0]
(0028,0010) Rows US # 2 1 [3305]
(0028,0011) Columns US # 2 1 [2540]
(0028,0100) BitsAllocated US # 2 1 [8]
(0028,0101) BitsStored US # 2 1 [8]
(0028,0102) HighBit US # 2 1 [7]
(0028,0103) PixelRepresentation US # 2 1 [0]
(0028,0106) SmallestImagePixelValue US # 2 1 [0]
(0028,0107) LargestImagePixelValue US # 2 1 [255]
what im trying to do is just resize specific images so they are not 24MB
trying ExportConverter3 = forward compressed as k1 to IR_HOST
says it recompresses but images are still huge and not resized and seem untouched
any other way to do with import converter or something?
Hi,
this must be a bug in the downsize code size checking. There is only one downsize routine used throughout.
Marcel
can i use something like this?
ImportConverters = 1
ImportConverter1 = dgate.exe "--convert_to_dicom:%f,1600,un,0"
Hi,
It will call the same code.
Marcel
Ok I'm going to try using import converter with dcmtk dcmscale thanks
Hi,
can yuo please mail me a file so that I can fix it?
Marcel
sure i'll send you a file
how can i call dcmscale from import converter to save back to original file while it's incoming i used command line on file and it works but can't get it to work in importer..i am keeping same sop instance uid
------------ Adding image files to server -----------
[CONQUESTSRV1] *** Importconverter0.0 error: "C:\dcmtk\bin\dcmscale.exe +un +Sxf .5 C:\dicom\data\201971\1.2.826.0.1.3680043.2.1635.0.3840606097.2836.1391005581.660_999999_000001_13910078100001.dcm C:\dicom\data\201971\1.2.826.0.1.3680043.2.1635.0.3840606097.2836.1391005581.660_999999_000001_13910078100001.dcm"
[CONQUESTSRV1] Added file: C:\dicom\data\201971\1.2.826.0.1.3680043.2.1635.0.3840606097.2836.1391005581.660_999999_000001_13910078100001.dcm
-----------------------------------------------------
Hi,
use 'process with'.
Marcel
Don’t have an account yet? Register yourself now and be a part of our community!