need help on forwording

Hi

I getting a small problem on forworddelay. I was testing Conquest 1.4.14 with MSSQL 2000. everything was working fine except forword delay.
I had config as follow:
# Configuration of forwarding and/or converter programs to export DICOM slices
ForwardAssociationLevel = STUDY
ForwardAssociationCloseDelay = 5
ForwardAssociationRefreshDelay = 3600
ForwardAssociationRelease = 0

ExportConverters = 1

ExportConverter0 = forward to PACSRELAY

ForwardCollectDelay = 1500
MaximumExportRetries = 0
MaximumDelayedFetchForwardRetries = 0

Both are using conquest 1.4.14Beta. Before First PACS was finish receiving slices from CT forwording was start sending to second PACS. It is cause more transfer time between first PACS and CT mechine. Slice was normaly 600 and 1000. Did my config wrong? Please help me out.

Hi

It start within 200 Sec. Connection was Local LAN. When I disable forwording, transfer process was very smooth, 1 slice transfer time was 2 Sec for CT and about 45 Sec for 4 MB CR. Forwording process was starting at about 120 to 135 slices if I enable forwording, doesn't matter delay 600 or higher. Any clue?