Would it be possible to add or modify Conqeust in the future to allow it to send to multiple places within one rule?
multiple sends in one rule
-
-
You can already do that with the forwarding, you jzst have to add it to the dicom.ini
We are automatically forwarding images to multiple workstations. -
I did see something in the PDF about RF*, but a wild card after a modility make much sense, can you shed some light on how you do it? Maybe give me an example of your code in your .ini file? Thanks!
-
here are my add ons to the dicom.ini
# Configuration of converter programs to export DICOM slices
ExportConverters = 2
ExportModality0 = *
ExportStationName0 = *
ExportFilter0 = ReferPhysi LIKE 'DrX%'
ExportConverter0 = forward to PACS1
ExportCalledAE0 = *
ExportCallingAE0 = *
ExportModality1 = *
ExportStationName1 = *
ExportFilter1 = *
ExportConverter1 = forward to PACS2
ExportCalledAE1 = *
ExportCallingAE1 = *PACS1 is the AETITLE of your Pacs, PACS1 in my case
DrX in this case is the name of the referring physician, if you want to split, ottherwise you set a wildcard *
apart from that you can seperate converning your modality
I am sending to 3 workstations simultanously, even to remote workstations via internet, ts workimg fine.
For further questions just post. -
Multiple sends in one rule are now possible in 1.4.12c
Marcel
-
Okay if I were to use 1.4.12c now and have mutiple sens in one rule, would this be a working example?
ForwardAssociationLevel = STUDY
ForwardAssociationCloseDelay = 5
ForwardAssociationRefreshDelay = 3600
ExportConverters = 1
ExportModality0 = MG
ExportFilter0 = StationName LIKE 'SJBR%'
ExportConverter0 = forward to 'MAMMORD%'and this would be the case if I have 3 read stations named MAMMORD1, MAMMORD2, & MAMMORD3? correct?
or how would I route to multiple AEs with one export converter?
-
no,
write forward to AE1; forward to AE2; forward to AE3
Marcel
-
I'm trying to forward to 4 devices.
Here's what I have for a rule...
ForwardAssociationLevel = IMAGE
ForwardAssociationCloseDelay = 5
ForwardAssociationRefreshDelay = 3600
ExportConverters = 1
ExportCallingAE0 = VISTA_QR_SCU
EXPORTMODALITY0 = CT
EXPORTCONVERTER0 = forward to IOW_CTSW1_PHI;IOW_SRV01_BRI;IOW_WS01_VIT;IOW_WS02_VITI get this error message
***Exportconverter0: Spawning 'IOW_CTSW1_PHI' failed (argv=C:\dicomgateway\data\It will only send to two devices. If I rearrange the order of devices in the rule, it will send to the other devices. Any ideas?
-
I think your problem could be solved by specifying 'forward to" (without the quotes) for each destination and keeping a space between the ; and 'forward'.
Also, just in case, make sure the export destinations know conquest correctly.
Just out of curiosity, why would you forwardassociationlevel on image?
Matt(of course I could be totally wrong)
-
Thanks, that did it.
Image was the default. I reckon I should change it to study, eh?
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!