Multiple ports question

I have a facility that wants me to send to one AE, but give different modalities different ports; CR is 16000, DX is 16001, etc. I have been trying different things and have come to the conclusion that I just have to set up ten instances of Conquest, one per modality to route properly. I can't write it to route properly otherwise given that the AE is the same. Am I missing something? Any ideas?

Thank you,

L.J.Jaszczak MD

Hmm, I have a problem. Here is my dicom.ini structure:

SQLHost =

SQLServer =

Username =

Password =

ForwardAssociationLevel = SERIES

ImportConverter0 = ifequal “%m”, “CR”; { forward to IP:16000 dest SDYSCP1 channel *; destroy; }

ImportConverter1 = ifequal “%m”, “CT”; { forward to IP:16001 dest SDYSCP1 channel *; destroy; }

ImportConverter2 = ifequal “%m”, “DR”; { forward to IP:16002 dest SDYSCP1 channel *; destroy; }

ImportConverter3 = ifequal “%m”, “DX”; { forward to IP:16003 dest SDYSCP1 channel *; destroy; }

...

Here is the result:

[CONQUESTSRV1] *** Importconverter0.0 error: ifequal “DX”, “CR”

[CONQUESTSRV1] ImportConverter0.0: forwarded object to IP:16000

[CONQUESTSRV1] *** ImportConverter0.0: Forward failed to connect to host IP:16000

I am stil struggling. Here is a part of the significant part of my my DICOM.INI:

SQLHost =

SQLServer =

Username =

Password =

Exportconverters = 11

ForwardAssociationLevel = SERIES

ImportConverter0 = ifequal “%m”, “CR”; { forward to 10.14.2.99:16000 dest SDYSCP1 channel *; destroy; }

ImportConverter1 = ifequal “%m”, “CT”; { forward to 10.14.2.99:16001 dest SDYSCP1 channel *; destroy; }

ImportConverter2 = ifequal “%m”, “DR”; { forward to 10.14.2.99:16002 dest SDYSCP1 channel *; destroy; }

ImportConverter3 = ifequal “%m”, “DX”; { forward to 10.14.2.99:16003 dest SDYSCP1 channel *; destroy; }

ImportConverter4 = ifequal “%m”, “FL”; { forward to 10.14.2.99:16004 dest SDYSCP1 channel *; destroy; }

ImportConverter5 = ifequal “%m”, “MG”; { forward to 10.14.2.99:16005 dest SDYSCP1 channel *; destroy; }

ImportConverter6 = ifequal “%m”, “MR”; { forward to 10.14.2.99:16006 dest SDYSCP1 channel *; destroy; }

ImportConverter7 = ifequal “%m”, “NM”; { forward to 10.14.2.99:16007 dest SDYSCP1 channel *; destroy; }

ImportConverter8 = ifequal “%m”, “PT”; { forward to 10.14.2.99:16008 dest SDYSCP1 channel *; destroy; }

ImportConverter9 = ifequal “%m”, “RF”; { forward to 10.14.2.99:16009 dest SDYSCP1 channel *; destroy; }

ImportConverter10 = ifequal “%m”, “US”; { forward to 10.14.2.99:16010 dest SDYSCP1 channel *; destroy; }

Trying to send a CT I get the following repeating error;

3/25/2020 2:19:46 PM [CONQUESTSRV1] [recompress]: recompressed with mode = j2 (strip=0)

3/25/2020 2:19:46 PM [CONQUESTSRV1] *** Importconverter0.0 error: ifequal “CT”, “CR”

3/25/2020 2:19:46 PM [CONQUESTSRV1] ImportConverter0.0: forwarded object to 10.14.2.99:16000

3/25/2020 2:19:46 PM [CONQUESTSRV1] [recompress]: recompressed with mode = UN (strip=1)

3/25/2020 2:19:48 PM [CONQUESTSRV1] Importconverter0.2: destroyed received image

3/25/2020 2:19:48 PM [CONQUESTSRV1] [recompress]: recompressed with mode = j2 (strip=0)

3/25/2020 2:19:48 PM [CONQUESTSRV1] *** Importconverter0.0 error: ifequal “CT”, “CR”

3/25/2020 2:19:48 PM [CONQUESTSRV1] ImportConverter0.0: forwarded object to 10.14.2.99:16000

It seems I have a syntax error, what am I doing wrong? Again, I am trying to get the system to route series to the same AE, IP, but different ports by modality.

Thank you!

LJJ

Ah, I copied and pasted and got the wrong " mark. That is it, the script works well now, thank you Marcel

LJJ