3D Slicer data retrieve from conquest

    Hi,


    I would like to query/retrieve data from conquest using 3D Slicer, but I was unable to get it running. It may be also problem on 3D Slicer site but let's see if somebody here was dealing with the same topic and was able to get it running. After modification of acrnema.map, the query seems to work fine. But the C-MOVE fails with following output:


    Slicer:

    Code
    About to retrieve 1.3.6.1.4.1.2452.6.3895409160.1338747868.2223972786.1677869976 from g40rpbpacsdev.med.tu-dresden.deStarting to retrieveStarting moveStudyNegotiating AssociationI: Requesting AssociationI: Association Accepted (Max Send PDV: 16372)Setting Retrieve ParametersSending Move RequestI: Sending C-MOVE Request (MsgID 1)I: Received C-MOVE Response (Failed: UnableToProcess)W: Status is 0xc005 (unknown)W: Will not wait for further C-MOVE responsesMOVE response receveid with status: Failed: UnableToProcessMOVE request failed, server does report errorMOVE request failed: No detailsRetrieve successI: Releasing Association


    Conquest:

    Code
    C-Move Destination: "CTKSTORE"

    Fri Apr  8 18:53:21 2016 Number of Images to send: 94

    Fri Apr  8 18:53:21 2016 Host 'CTKSTORE' did not accept the connection

    Fri Apr  8 18:53:21 2016 C-Move (StudyRoot)

    Fri Apr  8 18:53:21 2016 UPACS THREAD 84: ENDED AT: Fri Apr  8 18:53:21 2016

    Fri Apr  8 18:53:21 2016 UPACS THREAD 84: TOTAL RUNNING TIME: 0 SECONDS


    Any ideas where an issue can be?


    best


    Tomas

    Hi,


    is conquest defined in 3D slicer? In other words can you send from conquest to 3D slicer (initiated by conquest?). The issue is the reverse connection which is not accepted by slicer.


    Marcel

    Hi Marcel,


    the problem was that slicer is not starting DICOM listener automatically unless such behaviour is explicitly configured. And the listener starting configuration is actually in different window than the query/retrieve functionality so I have overlooked it initially. Sorry for the non relevant post. Everything works fine now.


    best


    Tomas

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login