Grabimagesfromserver

Vince · Apr 22nd 2011

Hello,
I have some problems with grabimagesfromserver
i want to save data from a dicom server to conquest every day
On AET there is dicom data from the 22 04 2011.
i have tried
dgate.exe --grabimagesfromserver:AET,20110422
dgate.exe --grabimagesfromserver:AET,20110421-20110422
dgate.exe --grabimagesfromserver:AET,20110422-20110421
nothing happens.

From the userinterface of conquest
at the level "STUDY-StudyRoot " with date=20110422 i can do a request with the correct list of patient !

with the level IMAGE or STUDY or SERIES or SERIES-studyroot or IMAGE-studyroot this doesn't work
with the level PATIENT list ALL the patient from AET (date ignored ?)...
with teh level PATIENT -patientstudyroot conquest is "not responding" = need restart of GUI

If you have some ideas ...
Thanks !
have a nice day !

marcelvanherk · Apr 22nd 2011

Hi,

grabimagesfromserver uses an image based query - which your modality apparent does not support. I suggest to try dgate --movestudies:movestudies:AET,conquestsrv1,20110422

Marcel

Vince · Apr 22nd 2011

Thanks for your quick answer.

movestudies:aesource,aedest,20110420-20110421
or
or
movestudies:aesource,aedest,20110421-20110420

movestudies:aesource,aedest,20110422
it doesn't work .... i ve got a list of testing transfer but no dicom transfer....
thanks for your help !
Vince

-----------------------
UPACS THREAD 22: ENDED AT: Fri Apr 22 15:16:43 2011
UPACS THREAD 22: TOTAL RUNNING TIME: 0 SECONDS
Connected by address: 0100007f
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"
[] 0000,0100 2 US CommandField 48
[] 0000,0110 2 US MessageID 1
[] 0000,0800 2 US DataSetType 257
[] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
[] 9999,0300 42 UN "Server command sent using DGATE -- option"
[] 9999,0400 52 UN "movestudies:aesource,aedest,20110420-20110421"
[] Server command sent using DGATE -- option
[] Connected by address: 0100007f
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[]
[] UPACS THREAD 23: STARTED AT: Fri Apr 22 15:17:54 2011
[] *** connection terminated
[] UPACS THREAD 23: ENDED AT: Fri Apr 22 15:17:54 2011
[] UPACS THREAD 23: TOTAL RUNNING TIME: 0 SECONDS

marcelvanherk · Apr 22nd 2011

Hi,

it should be something like:

dgate "--movestudies:AET,CONQUEST,20110420-20110421"

where AET is defined in acrname.map, and CONQUEST in the scanner's software. Which version are you using?

Marce;

Vince · Apr 22nd 2011

thanks for your response.

I have got the last version 1.4.16 .
i don't understand...

Vince · Apr 27th 2011

Hello !
can we do somethinglike that with Lua:
like:
dgate --lua:study-studyroot.move(AESOURCE,AEDEEST,20110422-20110423)

Thanks for your help
vince.

marcelvanherk · Apr 27th 2011

Hi,

The lua commands are indentical to the script commands. If you can state again which type of move works from the GUI, I can then investigate which command line option may work. Your system is very critical about which moves work and which don't.

Marcel

Vince · Apr 29th 2011

hello,
STUDY-StudyRoot
work on the GUI
thanks for your help !
Vince

Vince · Apr 29th 2011

Hello bis

ok on GUI if i do a search in STUDY-studyroot:
i can list all the patient of the 20110309
with in the "studydate" 20110309-20110309 (only "20110309" don't work correctly)
if i click on copy to destination toward conquest: it does'nt work !

if i select a patient name and then copy to destiantion =conquest :it doesn't work

if i select the patientID and then i chose 'query level'="patient' then copy to destiantion : conquest
the c-move works.

so a "magic command or script" would select the patients with "study-studyroot" from date A to date B; collect the patientIDs and then move the datas with the query level "patient" to the conquest server.

thanks again for your help; and sorry for my bad coding skills otherwise i could code myself this thing
Vince

marcelvanherk · May 1st 2011

Hi,

a move in studyroot mode does not work? - I would expect it should.

Marcel

Vince · May 4th 2011

hello,

i can list patient (Query selected dicom system ( a XELERIS MN GE workstation)) with
query level = STUDY-studyroot
patient ID='
patient name=
Study date=20110504-20110504

but it doesn't copy to destination!!!
with the same look as the "movestudies" in the logs:

IN QUERY/MOVE display:

Total of 6 item(s) found
------------ started copying ------------
Copying for patient:
Slice 0 of 0
------------ finished copying ------------

IN SERVER STATUS display:

[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
[ ] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
[ ]
[ ] UPACS THREAD 12: STARTED AT: Wed May 04 10:35:04 2011
[ ] *** connection terminated
[ ] UPACS THREAD 12: ENDED AT: Wed May 04 10:35:04 2011
[ ] UPACS THREAD 12: TOTAL RUNNING TIME: 0 SECONDS

Thanks for your help !
Vince

Vince · May 4th 2011

erratum :
patient ID=
replace
patient ID='

sorry

marcelvanherk · May 4th 2011

Hi,

try to double click on the 'Series number' label next to the so that all UID's are shown, next try to move a study - studyroot by selecting a paient ID and studyuid (double click in query result window).

Some systems will only move data when specifying an UID. I have changed the dgate --movestudies and --moevstudy command to use a studyroot move when possible in 1.4.16b. But first try the above option.

Marcel

Vince · May 4th 2011

re-hello,
when selecting study UID : it works !

i try to get and install 1.4.16b when i have 2 minutes ;
thanks !

Vince · May 4th 2011

rerehello
i have tried with the 1.1.16b
"dgate movestudies" moves nothing
dgate movethanks:Vince,Marcel,20110504-20110504

marcelvanherk · May 4th 2011

Hi,

Ok, you will have to use a batch file to move the data by date then. See the recent post about syncing two servers.

Marcel

Grabimagesfromserver

Participate now!

Share