Sorry Marcel,
Another problem. I've only recently started using CQ on 2008 Standard server. Using 1.4.16rc. Again, I am using these as a router, so only using ImportConverters, spoofing the calling AET as it forwards.
This is on multiple different servers, but dgate.exe services keeps stopping. I saw a couple posts for this on the forum, but never really saw a solution. Any ideas? Thanks!
Jeff
Hi Jeff,
I would try out a newer version like the latest 1.4.17alpha. I know there were quite a few bugs solved.
Marcel
I noticed that I needed rc6 for servers in order for the ImportConverters to recognize anything surrounded by "."
Will 1.4.17 recognize those on 2008 server?
Thanks again for your help.
Can you send a sample converter?
Marcel
Great news! Your latest version helped with another issue I had with US measurements. I'm early in testing regarding the dgate.exe service stopping. Will let you know how that goes.
I did run into another problem. One of our sites has an older US unit that causes the error below. I've had issues with this US unit before. If my memory serves, it's because it uses YBR-FULL for the Photometric interpretation. You have a fix out there for that, but thought I would let you know.
[CONQUESTSRV1] ***No valid presentation contexts/transfer syntax found in 76 candidates
[CONQUESTSRV1] ***In 76 presentation contexts
[CONQUESTSRV1] ***#Possible transfer syntaxes: 1
[CONQUESTSRV1] *** multiplex: connection terminated
After setting debug level to 4, I get this;
12/1/2012 10:04:08 PM [CONQUESTSRV1] Connected by address: 0b7eddcd
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.5' against list #0 = '1.2.840.10008.1.2'
12/1/2012 10:04:08 PM [CONQUESTSRV1] ***No valid presentation contexts/transfer syntax found in 76 candidates
12/1/2012 10:04:08 PM [CONQUESTSRV1] ***In 76 presentation contexts
12/1/2012 10:04:08 PM [CONQUESTSRV1] ***#Possible transfer syntaxes: 1
12/1/2012 10:04:08 PM [CONQUESTSRV1] InterogateAAssociateRQ failed
12/1/2012 10:04:08 PM [CONQUESTSRV1] *** multiplex: connection terminated
The presentation context '1.2.840.10008.1.2.5' is pounded out in the dgatesop.lst file. I remove the pound and get this;
12/1/2012 10:08:11 PM [CONQUESTSRV1] ***[DecompressJPEGL]: No jpeg data found
12/1/2012 10:08:11 PM [CONQUESTSRV1] ***[DecompressImage]: JPEG library decompression error
12/1/2012 10:08:11 PM [CONQUESTSRV1] ImportConverter0.1: forwarded object to isite
But, the image doesn't actually arrive to the PACS.
I tested the ImportConverter that you asked to see and they are working well. An example though is this;
ImportConverters = 2
ImportConverter0 = ifequal "%u","STENTOR_SCU"; forward to isite org EWS
ImportConverter1 = ifequal "%u","JLAPTOP"; forward to isite org TAMA_CR
Jeff
Hi Jeff,
try to use the oldfashioned external jpeg decompression (you have to add dcmdjpeg.exe to the server folder) :
UseBuiltInJPEG = 0
And see what happens.
Marcel
Marcel,
I added back in some of the jpeg sop's that you have recommended in the forum here, which helped with being able to send in the US images I referenced above. But, we are still back to the YBR-FULL issue that you have corrected in the past. Will if be possible for you to have a fix for 1.4.17? Thanks again!
Jeff
Hi Jeff,
do you remember when in the past? Any links?
Marcel
Here you go Marcel. This link also contains a link with a past fix. I didn't want to apply that fix blindly to 1.4.17. Thanks for checking it out.
http://forum.image-systems.biz…250&hilit=YBR_FULL#p11250
Jeff
Hi Jeff,
as far as I can see the fix is still in 1.4.17. What exactly goes wrong?
Marcel
The monochrome images show magnified and you can barely see anything due to overlapping shadow effect. The images with color appear fine. Any way I can send you a sample image?
Don’t have an account yet? Register yourself now and be a part of our community!