Hi,
I am using 1.4.16 in Linux with MySQL5.5.28. PACS receives data sets fine. Remote devices can query, but is not able to movescu or retrieve, even though dgate sees those devices correctly in acrnema.map. From the PACS, I can manually send images from data folder (saved in DICOM format) using dcmtk's storescu command to remote device's storescp just fine. But the same study when "pushed" from Conquest's web interface, or when movescu command was used on the remote device fails.
./dgate -v shows:
Sending file : /RAID01/conquest/data/XXXXXX/1.3.12.2.1107.5.2.32.35043.xxxxxxxxxxxxxx.dcm
Image Loaded from Read Ahead Thread, returning TRUE
Retrieve: remote connection dropped after 0 images, 953 not sent
C-Move (StudyRoot)
UPACS THREAD 27: ENDED AT: Wed Nov 28 14:45:58 2012
UPACS THREAD 27: TOTAL RUNNING TIME: 1 SECONDS
Remote station's movescu shows:
I: Received Store Request: MsgID 507, (MR)
RECV: .................................................................................................................................................E: DcmElement: Unknown Tag & Data (736c,2265) larger (572661794) than remaining bytes (586632) in file, premature end of stream
W: DIMSE Warning: (HPSS_QR,TESTPC): DIMSE receiveDataSetInMemory: dset->read() Failed (Invalid stream)
E: Store SCP Failed: 0006:020d DIMSE Failed to receive message
E: DIMSE failure (aborting sub-association): 0006:020d DIMSE Failed to receive message
E: DIMSE failure (aborting sub-association): 0006:020d DIMSE Failed to receive message
E: 0006:020c DIMSE Read PDV failed
E: 0000:0000 Normal
I: ===================== INCOMING DIMSE MESSAGE ====================
I: Message Type : C-MOVE RSP
I: Message ID Being Responded To : 1
I: Affected SOP Class UID : MOVEStudyRootQueryRetrieveInformationModel
I: Remaining Suboperations : 0
I: Completed Suboperations : 0
I: Failed Suboperations : 953
I: Warning Suboperations : 0
I: Data Set : none
I: DIMSE Status : 0xfe00: Cancel: Suboperations terminated due to Cancel Indication
I: ======================= END DIMSE MESSAGE =======================
I: Releasing Association
EDIT: The problem seems be to in Transfer syntax. When I used movescu in bit preserving mode, I got all of the images.