Posts by Gragoro

Yes I have duplicated corrupted data. To experiment with them

and you know what, I move the files manually, and manually delete the broken ones and everything goes.

The only thing is not clear why in the Incoming folder it selectively stops the process, the rights are configured.

Moving directories and restarting the process helps. The truth is not clear why

Okay i think i find one part of problem.
what about the characters ^ and ' , how the server reacts to them when pulling out research?
answer: Not a problem. with '

Okay, I found another interesting reason, the server does not want to go into the subdirectory.
Conquest see all dcm in /incoming/
But dont see in /incoming/2020/

Any ideas?

Now when I fix Raid controller.
I have two problems:
1.Conquest does not see images in incoming folder
2. I have corrupted/damaged dcm and don't know how to delete them not manually/

okay I am writing here for those who encounter the same problem.
if in the raid array one disk is not working properly, then the data can be selectively damaged.

and you get an error like this:

***[AddImageFile] /dicom_olddata/incoming/11155__ABDOMEN_CE_BUTURLIA_M_B/CT_11156/12/1.2.392.200036.9116.2.6.1.48.1211418729.1540873727.13 -FAILED: Error on Load

***[AddImageFile] /dicom_olddata/incoming/11155__ABDOMEN_CE_BUTURLIA_M_B/CT_11156/12/1.2.392.200036.9116.2.6.1.48.1211418729.1540873727.13 -FAILED: Error on Load

the script may cause the Conquest to stop pulling studies from the incoming folder and at the same time in the PacsTrouble.log files there may be no information why.

remove your script restart server with command and start server with

./dgate --quit:

Unfortunately, I did not find a single script or algorithm with which it was possible to ignore/delete/move broken files. PLEASE HELP.

Okay, i find problems with disk storage. Now IN Log

Sun Dec 20 13:37:01 2020 ***A fatal error occurred (out of memory) - closing server

Sun Dec 20 13:37:14 2020 *** Not enough rights to write in MAG0

Sun Dec 20 13:43:37 2020 ***VR:ReAlloc out of memory allocating -946867618 bytes

Sun Dec 20 13:43:37 2020 ***A fatal error occurred (out of memory) - closing server

Sun Dec 20 13:43:53 2020 *** Not enough rights to write in MAG0

Sun Dec 20 13:49:46 2020 ***VR:ReAlloc out of memory allocating -428730994 bytes

Sun Dec 20 13:49:46 2020 ***A fatal error occurred (out of memory) - closing server

Sun Dec 20 13:50:00 2020 *** Not enough rights to write in MAG0

Sun Dec 20 13:51:28 2020 ***VR:ReAlloc out of memory allocating -394025210 bytes

Sun Dec 20 13:51:29 2020 ***A fatal error occurred (out of memory) - closing server

Sun Dec 20 13:51:44 2020 *** Not enough rights to write in MAG0

Sun Dec 20 13:54:08 2020 ***VR:ReAlloc out of memory allocating -345509096 bytes

When i fix rights and restart server does not see images in incoming folder.

How safely kill conquest?

--quit: Stop the server

--safequit: Stop the server when not active
???

Problem #1
conquest does not see incoming folders.

I use this script maybe i need
drop him from memory or somewhere
RejectedImageConverter0 = x=DicomObject:new(); m=':'; y=Data.PatientID; x='deletepatient'; a=x..m..y; print(a); servercommand(a); retry()

disabling not effect.

Quote from marcelvanherk

Hi,

The first set has odd lenghts. You can load those by setting "NoDicomCheck = 1".

The last ones seem to be really corrupted. The processing does not stop on an error does it?

Marcel

Display More

Now i have a problem, conquest not import from the incoming folder
I have 100% load on process

but nothing happens

add line WatchFolder
nothing happens
but studies fine.
Conquest does not want to import.

***[AddImageFile] /dicom_exch/incoming/BABYUK_M_M_1125/CT_46486/2/1.2.840.113704.1.111.1432.1606983429.4170.dcm -FAILED: Error on Load

And how ignore?

I have a problem. During the recovery process by destroying the database and moving them to a new server with 150b, it turned out that not all data was in order.

I put all the data in the incoming folder
Tell me where to add something so as not to delete the damaged files manually.

(Mariadb database)

Thu Dec 17 01:55:17 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:22 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:27 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:32 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:37 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:42 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:47 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:52 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Thu Dec 17 01:55:57 2020 ***[AddImageFile] /data_disks/dicom_vitacom/vc_cherkasy/incoming/20201/12/04/1151_PUZYR_N_PL/CT_46516/9/1.2.840.113704.1.111.3388.1607070156.13778.dcm -FAILED: file does not contain correct UIDs

Somebody give answer. Whats going on

Thu Dec 17 01:48:06 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:11 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 0000001f)

Thu Dec 17 01:48:11 2020 ***Length = 7274617

Thu Dec 17 01:48:11 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:16 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 0000001f)

Thu Dec 17 01:48:16 2020 ***Length = 7274617

Thu Dec 17 01:48:16 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:21 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 0000001f)

Thu Dec 17 01:48:21 2020 ***Length = 7274617

Thu Dec 17 01:48:21 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:26 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 0000001f)

Thu Dec 17 01:48:26 2020 ***Length = 7274617

Thu Dec 17 01:48:26 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:31 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 0000001f)

Thu Dec 17 01:48:31 2020 ***Length = 7274617

Thu Dec 17 01:48:31 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:36 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 0000001f)

Thu Dec 17 01:48:36 2020 ***Length = 7274617

Thu Dec 17 01:48:36 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:41 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 0000001f)

Thu Dec 17 01:48:41 2020 ***Length = 7274617

Thu Dec 17 01:48:41 2020 ***[AddImageFile] /data_disks/dicom_exchange/incoming/Kononovych_V_G_246/CT_75823/4/1.2.840.113704.1.111.140.1606900580.5444.dcm -FAILED: Error on Load

Thu Dec 17 01:48:42 2020 ***Dynamic_Parse encountered an invalid element length during load of DCM file (in 00530054)

Thu Dec 17 01:48:42 2020 ***Length = 10551429

Hello marcelvanherk, I think that the conquest server is excellent, it is fast and convenient for implementing tasks. But really, as a Linux user, I do not have enough web application for administration and work with research. administration not user friendly.

Basically, I deploy multiple conquests servers on a single physical(virtual) machine. First, setting it up and MYSQL and then copying and changing the AE port databases names and the path to the directory with the dicom.

I have been missing a web client or other convenient administration tool for a long time.

Very often there are situations when you need to add new AE or remove the wrong research and these tasks could be delegated to another person and not have to climb into the command line every time.

There is also a significant lack of a queue manager. And blocking C-Find if the client is absent in the acrnema.

I'm even ready to patreon for these functions.

Thanks for your work

Thx very much

Sorry i dont have enough time for testing, in few days will try to do.

I update information about bug. Check link on cloud.

Okay, not a problem, will do it in Mon. I don't have enough time for that. But i will do.

Thx for your support.

I archive all files after complete all manipulation.

You can see in conquest_compiled.

If need some more, please explain, may be change debug level?

Partly log maybe on serverstatus.log

Ok,
I will generate some examples for you and send you a link on a cloud. Please check email.