possible reasons for the IQSERVER to not start could be:
- port of the IQSERVER (default: 104) is blocked/already in use by another application. In the first case you would need to check the firewall settings on the system, where iQ-VIEW is installed. The latter case can be checked with the command "netstat -anob" via the command prompt. All "LISTEN" ports will be shown there. - the path to the database is incorrect. If you have e.g. manually edited the path, it can happen that the "\" in the end of the path was forgotten. This will also stop the IQSERVER from starting (generally if an incorrect path is entered, the IQSERVER will not start). - incorrect parameters were entered.