iQ-VIEW/PRO incl. iQ-LITE and iQ-3D 3.1.103

  • 18k Downloads
License Agreement
IMAGE END-USER SOFTWARE LICENSE AGREEMENT
Website
https://www.image-systems.biz/iq-view

Get your iQ-VIEW/PRO Evaluation Version incl. iQ-LITE and iQ-3D

DISCONTINUATION NOTICE
Please be advised that our product, iQ-VIEW 3.0 (including iQ-VIEW/PRO 3.0.0, meddix VIEW/PRO 3.0.0, iQ-LITE 3.0.0, and meddix LITE 3.0.0), will reach its product discontinuation date on October 15, 2024.



Attention: Downloading this patch will require a new license activation! Read the instructions given in the iQ-VIEW 3.1.101 Update Guide carefully, before updating your existing iQ-VIEW installations.


The evaluation version of iQ-VIEW/PRO is limited in time and runs 15 days as a PRO evaluation version and afterwards additional 15 days as a BASIC evaluation version. The evaluation version is not a medical device and shall not be used for diagnostic purposes.


The installation package includes the iQ-VIEW/PRO radiology workstation, including the iQ-LITE media viewer, as well as the iQ-3D post-processing software (32-bit version). Also iQ-3D is available for a 30 day trial period. If you want to use the iQ-3D 64-bit version you have to download the installation package and deploy it manually on your system.


Note: The versions usually also function as an update from previous versions of iQ-VIEW and iQ-VIEW PRO as well as iQ-3D. Refer to the version information in case that specific limitations apply. Keep in mind that the previously installed licenses will become invalid and have to be renewed as well. Before performing software upgrades, contact your local reseller for the correct procedure and any potential upgrade fees.


In order to get technical help and support, consult the respective user documentation or contact your local reseller or our support team.


For detailed information on system requirements, software installation, administration and maintenance see the Administration Guides. For information on how to use iQ-VIEW/PRO, iQ-LITE and iQ-3D, including intended medical indication, intended users, conditions of use as well as contraindications and precautions, see the Instructions for Use. Both types of documents can be found in the Manuals section. Also find the iQ-VIEW/PRO DICOM Conformance Statement in the DICOM/HL7 Conformance Statements section.



Like 7

  • Version 3.1.103

    • 112.35 MB
    • 5.3k Downloads

    Attention: Downloading this patch may require a new license activation if you want to update from version 3.1.9 or lower! Read the instructions given in the iQ-VIEW 3.1.101 Update Guide carefully, before updating your existing iQ-VIEW installations.

    Including the following changes:

    Features

    • Integrated PDF viewer
    • Device labeling update for Australia and Switzerland

    Bugfixes

    • When loading a new study in iQ-VIEW it could happen that a PDF report from the previous study/patient was still displayed
    • DICOM-embedded PDFs were not displayed in the viewer and resulted in an error
    • In some cases, PDFs were displayed only after the user clicked or scrolled in the viewer
    • When writing the Polish diacritic ł, the log window opened instead
    • Fixed an error that occurred when transferring studies to the PACS

    See iQ-VIEW New Features and Bug Fixes PUB INT EN - 009R.pdf for more details


    This installation package contains the following product versions:

    • iQ-VIEW/PRO 3.1.103
    • iQ-LITE 3.2.1
    • iQ-3D 3.2.0

    The iQ-CAPTURE 1.3.0 DirectShow® interface can optionally be used in connection with iQ-VIEW PRO. The software is not included in the iQ-VIEW 3D setup but has to be integrated manually into an iQ-VIEW PRO installation. The iQ-CAPTURE 1.3.0 setup can be downloaded iQ-CAPTURE_1.3.0_IEU_Setup.zip.

  • Version 3.1.9

    • 116.61 MB
    • 1.5k Downloads

    This patch replaces the previously announced 3.1.8 patch.

    Including the following changes:

    • Add symbol and contact details of the swiss representative to user documentation

    See PD-730-72 iQ-VIEW_iQ-3D New Features and Bug Fixes PUB INT EN - 006R.pdf for more details.


    This installation package contains the following product versions:

    • iQ-VIEW/PRO 3.1.9
    • iQ-LITE 3.1.9
    • iQ-3D 3.2.0

    The iQ-CAPTURE 1.3.0 DirectShow® interface can optionally be used in connection with iQ-VIEW PRO. The software is not included in the iQ-VIEW 3D setup, but has to be integrated manually into an iQ-VIEW PRO installation. The iQ-CAPTURE 1.3.0 setup can be downloaded iQ-CAPTURE_1.3.0_IEU_Setup.zip.