Posts by 305016671

Hi Marcel,

please see below for a copy of the acrnema.map. Also I pasted in a copy of the serverstatus.log. The serverstatus.log was taken when exporting a DICOM study from a workstation to CONQUESTSRV1 (both on the same computer) and wanting to have that study automatically forwarded to CONQUESTSRV2 on SERVER2. Hope it helps and thanks heaps.

Jim.

_____________________________________________________________________________________
CONQUESTSRV1 127.0.0.1 5678 un

V* * 1234 un
S* * 5678 un
CONQUESTSRV2 SERVER2 5678 un

_____________________________________________________________________________________

1/07/2009 11:09:45 PM [CONQUESTSRV1] UPACS THREAD 5: STARTED AT: Wed Jul 01 23:09:45 2009
1/07/2009 11:09:45 PM [CONQUESTSRV1] Calling Application Title : "MYPACS "
1/07/2009 11:09:45 PM [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
1/07/2009 11:09:45 PM [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 32768
1/07/2009 11:09:45 PM [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.1.7" 1
1/07/2009 11:09:45 PM [CONQUESTSRV1] Presentation Context 1 "1.2.840.10008.5.1.4.1.1.6.1" 1
1/07/2009 11:09:45 PM [CONQUESTSRV1] Presentation Context 2 "1.2.840.10008.5.1.4.1.1.3.1" 1
1/07/2009 11:09:45 PM [CONQUESTSRV1] Presentation Context 3 "1.2.840.10008.5.1.4.1.1.6" 1
1/07/2009 11:09:45 PM [CONQUESTSRV1] Presentation Context 4 "1.2.840.10008.5.1.4.1.1.3" 1
1/07/2009 11:09:48 PM [CONQUESTSRV1] Written file: D:\documents and settings\305016671\desktop\dicomserver1414\data\220609\1.2.840.113619.2.98.1127.1245663128.0.10_0001_000001_1246453785000b.v2
1/07/2009 11:09:49 PM [CONQUESTSRV1] UPACS THREAD 5: ENDED AT: Wed Jul 01 23:09:49 2009
1/07/2009 11:09:49 PM [CONQUESTSRV1] UPACS THREAD 5: TOTAL RUNNING TIME: 4 SECONDS
1/07/2009 11:09:49 PM [CONQUESTSRV1] Exportconverter0.0: queued forward STU - (single object of 220609) to SERVER2
1/07/2009 11:10:43 PM [CONQUESTSRV1]
1/07/2009 11:10:43 PM [CONQUESTSRV1] UPACS THREAD 6: STARTED AT: Wed Jul 01 23:10:43 2009
1/07/2009 11:10:43 PM [CONQUESTSRV1] Calling Application Title : "CONQUESTSRV1 "
1/07/2009 11:10:43 PM [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
1/07/2009 11:10:43 PM [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384
1/07/2009 11:10:43 PM [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.1.2" 1
1/07/2009 11:10:43 PM [CONQUESTSRV1] C-Move Destination: "SERVER2 "
1/07/2009 11:10:43 PM [CONQUESTSRV1] Number of images to send: 5
1/07/2009 11:10:45 PM [CONQUESTSRV1] Host 'SERVER2 ' did not accept the connection
1/07/2009 11:10:45 PM [CONQUESTSRV1] C-Move (PatientRoot)
1/07/2009 11:10:45 PM [CONQUESTSRV1] ***preretrieve/forward xxx to: remote DICOM error
1/07/2009 11:10:45 PM [CONQUESTSRV1] UPACS THREAD 6: ENDED AT: Wed Jul 01 23:10:45 2009
1/07/2009 11:10:45 PM [CONQUESTSRV1] UPACS THREAD 6: TOTAL RUNNING TIME: 2 SECONDS
1/07/2009 11:10:49 PM [CONQUESTSRV1]
1/07/2009 11:10:49 PM [CONQUESTSRV1] UPACS THREAD 7: STARTED AT: Wed Jul 01 23:10:49 2009
1/07/2009 11:10:49 PM [CONQUESTSRV1] Calling Application Title : "CONQUESTSRV1 "
1/07/2009 11:10:49 PM [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
1/07/2009 11:10:49 PM [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384
1/07/2009 11:10:49 PM [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.1.2" 1
1/07/2009 11:10:49 PM [CONQUESTSRV1] C-Move Destination: "SERVER2 "
1/07/2009 11:10:49 PM [CONQUESTSRV1] Number of images to send: 1
1/07/2009 11:10:51 PM [CONQUESTSRV1] ***preretrieve/forward xxx to: remote DICOM error
1/07/2009 11:10:51 PM [CONQUESTSRV1] Host 'SERVER2 ' did not accept the connection
1/07/2009 11:10:51 PM [CONQUESTSRV1] C-Move (PatientRoot)
1/07/2009 11:10:51 PM [CONQUESTSRV1] UPACS THREAD 7: ENDED AT: Wed Jul 01 23:10:51 2009
1/07/2009 11:10:51 PM [CONQUESTSRV1] UPACS THREAD 7: TOTAL RUNNING TIME: 2 SECONDS

Hi Marcel,

Thanks for offering to help with my problem. It seems that the forum isn't allowing me to upload the acrnema.map file here. Would it be possible to email it to you?

Regards,

Jim

Hi Robert,

We seem to be getter closer but not quite there yet. By taking out the "ExportCallingAE0" I'm at least seeing Server1 trying to forward the patient (about 1 minute after server1 recieves it) but there is an error when doing so, here's a copy of the server status log:
__________________________________________________________________________
[CONQUESTSRV1] UPACS THREAD 8: STARTED AT: Sat Jun 27 10:34:48 2009
[CONQUESTSRV1] Calling Application Title : "CONQUESTSRV1 "
[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384
[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.1.2" 1
[CONQUESTSRV1] C-Move Destination: "SERVER2 "
[CONQUESTSRV1] Number of images to send: 10
[CONQUESTSRV1] Host 'SERVER2 ' did not accept the connection
[CONQUESTSRV1] C-Move (PatientRoot)
[CONQUESTSRV1] ***preretrieve/forward xxx to: remote DICOM error
[CONQUESTSRV1] UPACS THREAD 8: ENDED AT: Sat Jun 27 10:34:50 2009
[CONQUESTSRV1] UPACS THREAD 8: TOTAL RUNNING TIME: 2 SECONDS
___________________________________________________________________________

Again, I did a manual MOVE of the data and that worked without a problem so I don't understand why SERVER2 "did not accept the connection". Any other ideas???

Regards,

Jim

Hi Robert,

Thanks for your help. Unfortunately still no luck with the automatic forwarding of the study to a second server. I copied the complete script that you modified for me (fixed the AE Tittle mix up) and again pasted it in the dicom.ini file with no success. I also tried using the IP address in the script rather than the computer name (and updated the "Known dicom providers" tab to reflect the change). Also, just to make sure I could manually transfer between the two servers I successfully did a Query/Move of the patient that I'm trying to have automatically forwarded. Is there anything else you can recommend trying?

Kind regards,

Jim

Hi All,

Was wondering if someone could help me, I'm trying to use Conquest server as a DICOM router to forward patients to a second Conquest DICOM server at a different physical location over a relatively low bandwidth internet connection. After reading a few posts and also having a look at the pdf document that comes with the Conquest download i'm confident that this can be done. As I'm very inexperienced with writing script (definately not a programer!) I used the below script and pasted it in the dicom.ini file. However, it doesn't seem to be forwarding the files to the second server.
__________________________________________________
ForwardAssociationLevel = STUDY
ForwardAssociationCloseDelay = 5
ForwardAssociationRefreshDelay = 3600
ForwardCollectDelay = 60
ExportConverters = 1
ExportCalledAE0 = CONQUESTSRV1
ExportCallingAE0 = CONQUESTSRV2
ExportConverter0 = forward STUDY to SERVER2
__________________________________________________

Where, CONQUESTSRV1 is the AE title of the sending device, CONQUESTSRV2 is the AE title of the recieving device and SERVER2 is the computer name of the computer that the second DICOM server is installed on. I also updated the "known DICOM Providers list" on Server 1to include the second DICOM server (CONQUESTSRV2 on SERVER2). Any help or advise would be much appreciated. Thanks to all in advance.

Regards,

Jim

Hi Yves,

Thanks for the prompt reply. I'll give that a go.

Regards,

Jim

Hi everyone,

When opening a Series, only one tile in the top bar of the viewer is displayed which contains all the images associated with that series which have been taken from an Ultrasound machine. The series contains both Cine loops and also individual images. Is it possible to open a series and have the individual images and Cine loops displayed as different tiles within the bar at the top of the viewer?

Regards to all,

Jim