Posts by hammad

    Hi


    I had gone through the manual and found the following command for modification of Patient details.

    --modifypatid:patid,file


    will you please guide or share what is the format of this file and its location.


    and if i want to do bulk update say 50,000 patients what will be the procedure.


    --HM

    But after modification in the older command i got the data to be transferred by using this command


    ImportConverter0 = forward to RoganOnlineXS channel *; destroy;


    If possible can you share the updated statement , please

    Hi Marcel


    This is the entry in the dicom.ini file.


    # Configuration of rules to modify, log or reject incoming DICOM slices


    ImportConverter0 = ifequal “%m”, “CT”; { forward to RoganOnlineXS channel *; destroy; }

    ImportConverter1 = ifequal “%m”, “US”; { forward to RoganOnlineXS channel *; destroy; }

    ImportConverter2 = ifequal “%m”, “MG”; { forward to RoganOnlineXS channel *; destroy; }

    ImportConverter3 = ifequal “%m”, “CR”; { forward to RoganOnlineXS channel *; destroy; }

    ImportConverter4 = ifequal “%m”, “XA”; { forward to RoganOnlineXS channel *; destroy; }


    And this is the error on the console when i send images to the conquest


    7/2/2019 3:16:15 PM [PACS] *** Importconverter0.0 error: ifequal “XA”, “CT”

    7/2/2019 3:16:17 PM [PACS] *** ImportConverter0.1: Forward failed to send DICOM image to RoganOnlineXS

    7/2/2019 3:16:19 PM [PACS] *** Importconverter0.0 error: ifequal “XA”, “CT”

    7/2/2019 3:16:20 PM [PACS] *** ImportConverter0.1: Forward failed to send DICOM image to RoganOnlineXS

    7/2/2019 3:16:20 PM [PACS] *** Importconverter0.0 error: ifequal “SR”, “CT”

    7/2/2019 3:16:20 PM [PACS] *** ImportConverter0.1: DICOM server RoganOnlineXS does not accept type of forwarded image

    7/2/2019 3:16:20 PM [PACS] *** Importconverter0.0 error: ifequal “XA”, “CT”

    7/2/2019 3:16:21 PM [PACS] *** ImportConverter0.1: Forward failed to send DICOM image to RoganOnlineXS


    I tested the above import convertors using dcm4che toolkit but in that data is saved but i got following error on the console.


    PACS] UPACS THREAD 5: STARTED AT: Tue Jul 02 15:29:47 2019

    [PACS] Calling Application Title : "DCMSND "

    [PACS] Called Application Title : "PACS "

    [PACS] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

    [PACS] Presentation Context 0 "1.2.840.10008.5.1.4.1.1.1.2.1" 1

    [PACS] *** Importconverter0.0 error: ifequal “MG”, “CT”

    [PACS] ImportConverter0.5: forwarded object to DCMRCV

    [PACS] Importconverter0.2: destroyed received image

    [PACS] *** Importconverter0.0 error: ifequal “MG”, “CT”

    [PACS] ImportConverter0.5: forwarded object to DCMRCV

    [PACS] Importconverter0.2: destroyed received image


    My question is Why i am getting these error ([PACS] *** Importconverter0.0 error: ifequal “MG”, “CT”) when the Modality type is MG and why it shows CT with MG. Is there any error in the importconvertor.


    Please guide.

    Hi


    I want to forward images as they are received instead of saving them. I had found a script on the forum that is using the ImportConvertor. The problem is that i don't know about the Modalities that will connect to this server and forward images. I modify my old script but it saves images on the HDD.



    ExportConverters = 1

    ExportModality0 = *

    ExportStationName0 = *

    ExportCalledAE0 = *

    ExportCallingAE0 = *

    ExportConverter0 = forward to RoganOnlineXS channel *; destroy;


    This is the error i am facing and no images are fwded.

    6/19/2019 3:31:47 PM [PACS] ExportConverter0.0: forward D:\Patient Data\MG\20180419\114895-(KHALID^SHAZIA)\unknown\00930000.dcm to RoganOnlineXS

    6/19/2019 3:31:47 PM [PACS] *** ExportConverter0.0: DICOM server RoganOnlineXS does not accept type of forwarded image

    Appended is the Server Log


    6/12/2019 11:34:45 AM [PACS] UPACS THREAD 8: STARTED AT: Wed Jun 12 11:34:44 2019

    6/12/2019 11:34:45 AM [PACS] Calling Application Title : "CCWS "

    6/12/2019 11:34:45 AM [PACS] Called Application Title : "PACS "

    6/12/2019 11:34:45 AM [PACS] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 116794

    6/12/2019 11:34:45 AM [PACS] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

    6/12/2019 11:34:45 AM [PACS] C-Move Destination: "CCWS"

    6/12/2019 11:34:45 AM [PACS] C-Move (StudyRoot)

    6/12/2019 11:34:45 AM [PACS] UPACS THREAD 8: ENDED AT: Wed Jun 12 11:34:45 2019

    6/12/2019 11:34:45 AM [PACS] UPACS THREAD 8: TOTAL RUNNING TIME: 1 SECONDS

    [PACS] 20190612 11:34:54 Started zip and cleanup thread

    6/12/2019 11:34:54 AM [PACS] set normal log directly to file from GUI

    [PACS] 20190612 11:34:57 set debug level from GUI

    [PACS] 20190612 11:34:57 set debug log directly to file from GUI

    [PACS] 20190612 11:34:58 set debug level from GUI

    [PACS] 20190612 11:34:58 set debug level from GUI

    20190612 11:34:58 Connected by address: 0100007f

    20190612 11:34:58 Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'

    20190612 11:34:58 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"

    20190612 11:34:58 0000,0100 2 US CommandField 48

    20190612 11:34:58 0000,0110 2 US MessageID 7

    20190612 11:34:58 0000,0800 2 US DataSetType 257

    20190612 11:34:58 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"

    20190612 11:34:58 9999,0300 24 LO ConquestConsoleText "set debug level from GUI"

    20190612 11:34:58 9999,0400 12 LO ConquestConsoleComma "debuglevel:2"

    [PACS] 20190612 11:34:58 set debug level from GUI

    20190612 11:34:58 Connected by address: 0100007f

    20190612 11:34:58 Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'

    20190612 11:34:58 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"

    20190612 11:34:59 0000,0100 2 US CommandField 48

    20190612 11:34:59 0000,0110 2 US MessageID 7

    20190612 11:34:59 0000,0800 2 US DataSetType 257

    20190612 11:34:59 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"

    20190612 11:34:59 9999,0300 24 LO ConquestConsoleText "set debug level from GUI"

    20190612 11:34:59 9999,0400 12 LO ConquestConsoleComma "debuglevel:3"

    [PACS] 20190612 11:34:59 set debug level from GUI

    20190612 11:35:02 Connected by address: 0100007f

    20190612 11:35:02 Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'

    20190612 11:35:02 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"

    20190612 11:35:02 0000,0100 2 US CommandField 48

    20190612 11:35:02 0000,0110 2 US MessageID 7

    20190612 11:35:02 0000,0800 2 US DataSetType 257

    20190612 11:35:02 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"

    20190612 11:35:02 9999,0300 22 LO ConquestConsoleText "set debug log from GUI"

    20190612 11:35:02 9999,0400 16 LO ConquestConsoleComma "debuglog_on:1111"

    [PACS] 20190612 11:35:02 set debug log from GUI

    6/12/2019 11:35:04 AM [PACS] Stopped zip and cleanup thread

    [PACS] 20190612 11:35:08 Started zip and cleanup thread

    6/12/2019 11:35:08 AM [PACS] Connected by address: 0100007f

    6/12/2019 11:35:08 AM [PACS] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'

    6/12/2019 11:35:08 AM [PACS] 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"

    6/12/2019 11:35:08 AM [PACS] 0000,0100 2 US CommandField 48

    6/12/2019 11:35:08 AM [PACS] 0000,0110 2 US MessageID 7

    6/12/2019 11:35:08 AM [PACS] 0000,0800 2 US DataSetType 257

    6/12/2019 11:35:08 AM [PACS] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"

    6/12/2019 11:35:08 AM [PACS] 9999,0300 40 LO ConquestConsoleText "set debug log directly to file from GUI"

    6/12/2019 11:35:08 AM [PACS] 9999,0400 28 LO ConquestConsoleComma "debuglog_on:serverstatus.log"

    6/12/2019 11:35:08 AM [PACS] set debug log directly to file from GUI

    [PACS] 20190612 11:35:19 Connected by address: e80a10ac

    [PACS] 20190612 11:35:19 Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'

    [PACS] 20190612 11:35:19 Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'

    [PACS] 20190612 11:35:19

    [PACS] 20190612 11:35:19 UPACS THREAD 18: STARTED AT: Wed Jun 12 11:35:19 2019

    [PACS] 20190612 11:35:19 A-ASSOCIATE-RQ Packet Dump

    [PACS] 20190612 11:35:19 Calling Application Title : "CCWS "

    [PACS] 20190612 11:35:19 Called Application Title : "PACS "

    [PACS] 20190612 11:35:19 Application Context : "1.2.840.10008.3.1.1.1", PDU length: 116794

    [PACS] 20190612 11:35:19 Number of Proposed Presentation Contexts: 1

    [PACS] 20190612 11:35:19 Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

    [PACS] 20190612 11:35:19 Server Command := 0021

    [PACS] 20190612 11:35:19 Message ID := 0001

    [PACS] 20190612 11:35:19 C-Move Destination: "CCWS"

    [PACS] 20190612 11:35:19 0000,0002 28 UI AffectedSOPClassUID "1.2.840.10008.5.1.4.1.2.2.2"

    [PACS] 20190612 11:35:19 0000,0100 2 US CommandField 33

    [PACS] 20190612 11:35:19 0000,0110 2 US MessageID 1

    [PACS] 20190612 11:35:19 0000,0600 4 AE MoveDestination "CCWS"

    [PACS] 20190612 11:35:19 0000,0700 2 US Priority 0

    [PACS] 20190612 11:35:19 0000,0800 2 US DataSetType 514

    [PACS] 20190612 11:35:19 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"

    [PACS] 20190612 11:35:19 Retrieve: move destination not allowed or known

    : CCWS[PACS] 20190612 11:35:19 C-Move (StudyRoot)

    [PACS] 20190612 11:35:19 UPACS THREAD 18: ENDED AT: Wed Jun 12 11:35:19 2019

    [PACS] 20190612 11:35:19 UPACS THREAD 18: TOTAL RUNNING TIME: 0 SECONDS

    [PACS] 20190612 11:35:44 Connected by address: 0100007f

    [PACS] 20190612 11:35:44 Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'

    [PACS] 20190612 11:35:44 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"

    [PACS] 20190612 11:35:44 0000,0100 2 US CommandField 48

    [PACS] 20190612 11:35:44 0000,0110 2 US MessageID 7

    [PACS] 20190612 11:35:44 0000,0800 2 US DataSetType 257

    [PACS] 20190612 11:35:44 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"

    [PACS] 20190612 11:35:44 9999,0400 6 LO ConquestConsoleComma "silent"

    Hi Marcel


    Beside my production Server i had also setup a Test Server on a normal PC (OS Windows 7 Ultimate x64). On the same PC i had installed ClearCanvas Workstation 2.0 SP1 and Efilm Workstation 4.0.2. Copied some dummy data and pull images from server on local workstations and remote workstations images were copied. But today when i copied small chunk of data from live server to this temp server i again getting the same error that i was receiving on the Production Server.




    I wanted to know is this because of some wrong configuration, Network traffic, Viruses/trojans or etc.



    Please also update me on this error i get on server console while copying data. My current configuration is without compression.


    20190610 13:45:22 ***[OpenJP2 decompress]: Jpeg 2K code stream did not decode.

    20190610 13:45:22 ***[DecompressImage]: failed to decompress JP2000

    20190610 13:45:22 ***[OpenJP2(J2k)]: Failed to decode.


    20190610 13:45:22 ***[OpenJP2(J2k)]: Failed to decode tile 1/1



    Please guide.


    --HM

    Hi


    I had installed EFILM Workstation 4.0.2 on two of our sites with conquest PACS Server. One of the site we are using the latest version and on the other side its a downgraded version.


    On site A where its a downgraded version of conquest we can easily pull and view the US and XA images without any difficulty whereas on Site B where the latest version of server is installed i am facing issues in pulling/viewing the images. Even if i try to push images from the server i get DICOM error.


    The OS at Site A is Window Server 2008 R2 EE x64 and on site B its Windows Server 2012 R2 x64. Can this is issue be because of the OS???


    On viewing the EFILM Workstation log it says that required transfer syntax is not mentioned and its rejecting it. My questions are :-


    1. If the same images are viewed at one site why they are giving me error on the other side.

    2. I tried to view images using Radiant DICOM Viewer but still same error.Even i try to push images from server i get the DICOM Error.

    3. How to add the missing transfer syntax in the conquest to accept the images.



    All logs of PACS Server and EFILM is attached.

    Hi


    I want to implement following options in my current setup. Please guide me how to do so .


    1. AET of the Archive:: Define that specific AETs can Q/R from a specific MAG. All their data will be stored in specific MAG (this is done using lua. But have to code for every sending AET).


    2. Access control over AETs:: When there are multiple Application Entities which need to store objects. but one Application Entity should not be able to see the studies sent by the other Application Entities.


    3. Apply Retention Policy :: Based on the policy, studies can be deleted or retained.


    4. Audit Logger:: Log for image saving on devices, Query that is made to the server and images that are retrieved form the server,


    --HM

    Hi


    Firstly will someone please guide me how can i setup separate DICOM Port for Image Storage and DICOM Query Retrieve in the PACS Server. Currently all the communication is on one defined port.


    --HM

    Hi


    I am using the latest version of conquest pacs server and it is saving data in jk form. But when i try to query the server from ClearCanvas Workstation 2 SP1, it gives me error and if i try to push images from PACS Server it gives me error DICOM ERROR: DICOM CONNECTION ERROR. The AET, IP and Port are already configured in the known dicom providers list. I want to view Ultrasound, Mammography and Angio Scan (both still images and cone loops).



    Please guide.