Posts by marcoferr1974

Marcel,

my deepest apologies for replying so late to this thread. On average I have to reboot the server 3/4 times per week to overcome this issue.

There's no virus on this machine, I use a really good AV (not your average norton/mcafee/free av), if you think the AV may be interfering I could set up an exclusion for the dicom folder if you can't identify the issue.

In any case. I just installed 1.5.0c, I copied the following files from the new zip:

conquestdicomserver

dgate.dic

dgateserv

dgate64

lua5.1.dll

libmysql64.dll

libpq64.dll

(I am always troubled by upgrading with simply moving a few files and everything works!)

Since my last post I upgraded the server to windows 11, thinking that a new fresh OS may have resolved the issue but it's exactly the same (with win10 or win11) that leads me to believe it's not OS related.

I setup the debug level to 4 and write to file. I will let it run until I am told the server is stuck again and then collect the file (where would it be?) and send it to you or post it here.

Thanks again for all you do, you're brilliant.

Marco

I have a Conquest Dicom server 1.5.0b installed on a Xeon machine that has no issues, however after some time the server runs (it's on 24/7) it becomes unresponsive to new studies, no matter what I try I am unable to upload or retrieve any new studies. The only solution I have is to reboot the server altogether and everything comes back to normal. When the server stops working properly I get the same sequence of errors (shown in the picture). Note, the server gui responds normally as if everything is ok, but the server is unable to receive or retrieve any new studies. Marcel, thanks for all you do, this is a monumental effort.

believe it or not...this:

The (QualifyOn) (mapped) IP:Server, PORT:Server line is correct?

and the other thread you replied to about known dicom nomenclature...fixed the issue.

there was a KP* * * un

in the known dicom and that caused the kpacs clients to fail. I removed the line from the known dicom and we are whole again.

THANK YOU SO MUCH. (probably someone putting a star under the IP should flag an error...)

Thank you Marcel, you rock.

Hello,

I am trying to accept every dicom provider as they change rather frequently.

Right now I use the following nomenclature:

DICOM AE TITLE IP PORT COMPRESSION

KPServer 192.168.1.2 1234 un

Is it possible to just do

DICOM AE TITLE IP PORT COMPRESSION

* * * un

Thanks

here's the debug log from conquest:

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 1180: STARTED AT: Fri Jan 22 13:18:25 2021

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.1" 1

[CONQUESTSRV1] Server Command := 0020

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] (StudyRootQuery) search level: SERIES

[CONQUESTSRV1] Query On Series

[CONQUESTSRV1] Issue Query on Columns: DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta

[CONQUESTSRV1] Values: DICOMStudies.StudyInsta = '1.2.840.113619.6.106.2258162074100131737529527252132385677570' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta

[CONQUESTSRV1] Tables: DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 1

[CONQUESTSRV1] C-Find (StudyRoot) located 1 records

[CONQUESTSRV1] UPACS THREAD 1180: ENDED AT: Fri Jan 22 13:18:26 2021

[CONQUESTSRV1] UPACS THREAD 1180: TOTAL RUNNING TIME: 1 SECONDS

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 1181: STARTED AT: Fri Jan 22 13:18:26 2021

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

[CONQUESTSRV1] Server Command := 0021

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] C-Move Destination: "KPServer"

[CONQUESTSRV1] (QualifyOn) (mapped) IP:Server, PORT:Server

[CONQUESTSRV1] MyStudyRootRetrieveGeneric :: SearchOn

[CONQUESTSRV1] Query On Image

[CONQUESTSRV1] Issue Query on Columns: DICOMImages.SOPClassUI, DICOMImages.SOPInstanc, DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta,DICOMImages.ObjectFile,DICOMImages.DeviceName

[CONQUESTSRV1] Values: DICOMSeries.SeriesInst = '1.2.840.113619.2.364.65140653520588611400.1610629553.7951.5' and DICOMStudies.StudyInsta = '1.2.840.113619.6.106.2258162074100131737529527252132385677570' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta and DICOMImages.SeriesInst = DICOMSeries.SeriesInst

[CONQUESTSRV1] Tables: DICOMImages, DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 11

[CONQUESTSRV1] Number of Images to send: 11

[CONQUESTSRV1] Host 'KPServer' did not accept the connection

[CONQUESTSRV1] C-Move (StudyRoot)

[CONQUESTSRV1] UPACS THREAD 1181: ENDED AT: Fri Jan 22 13:18:29 2021

[CONQUESTSRV1] UPACS THREAD 1181: TOTAL RUNNING TIME: 3 SECONDS

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 1182: STARTED AT: Fri Jan 22 13:18:46 2021

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.1" 1

[CONQUESTSRV1] Server Command := 0020

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] (StudyRootQuery) search level: SERIES

[CONQUESTSRV1] Query On Series

[CONQUESTSRV1] Issue Query on Columns: DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta

[CONQUESTSRV1] Values: DICOMStudies.StudyInsta = '1.2.840.113619.6.106.3147531492498012030830130126994273486759' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta

[CONQUESTSRV1] Tables: DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 1

[CONQUESTSRV1] C-Find (StudyRoot) located 1 records

[CONQUESTSRV1] UPACS THREAD 1182: ENDED AT: Fri Jan 22 13:18:46 2021

[CONQUESTSRV1] UPACS THREAD 1182: TOTAL RUNNING TIME: 0 SECONDS

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 1183: STARTED AT: Fri Jan 22 13:18:46 2021

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

[CONQUESTSRV1] Server Command := 0021

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] C-Move Destination: "KPServer"

[CONQUESTSRV1] (QualifyOn) (mapped) IP:Server, PORT:Server

[CONQUESTSRV1] MyStudyRootRetrieveGeneric :: SearchOn

[CONQUESTSRV1] Query On Image

[CONQUESTSRV1] Issue Query on Columns: DICOMImages.SOPClassUI, DICOMImages.SOPInstanc, DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta,DICOMImages.ObjectFile,DICOMImages.DeviceName

[CONQUESTSRV1] Values: DICOMSeries.SeriesInst = '1.2.840.113619.2.364.65140653520588611400.1611151131.7996.0' and DICOMStudies.StudyInsta = '1.2.840.113619.6.106.3147531492498012030830130126994273486759' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta and DICOMImages.SeriesInst = DICOMSeries.SeriesInst

[CONQUESTSRV1] Tables: DICOMImages, DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 16

[CONQUESTSRV1] Number of Images to send: 16

[CONQUESTSRV1] Host 'KPServer' did not accept the connection

[CONQUESTSRV1] C-Move (StudyRoot)

[CONQUESTSRV1] UPACS THREAD 1183: ENDED AT: Fri Jan 22 13:18:49 2021

[CONQUESTSRV1] UPACS THREAD 1183: TOTAL RUNNING TIME: 3 SECONDS

Marcel,

thank you for always following up. I am not always at this location and that's why I reply slowly.

The quickest way to update is to stop the server, close it, unzip the new version and dump it into the old conquest folder, right?

Marcel,

thank you so much for replying. I actually turned off the firewall for private network on the kpacs workstation and I have the same issue. It just keeps saying that the workstation did not accept the connection.

I really don't know what's preventing the images from being retrieved.

Querying studies from the workstation is never a problem. When I start requesting studies the process starts but then it fails....I am attaching some logs and snapshots to show what's happening.

Below is the log from the kpacs:

*******************************************************

1/8/2021 12:28:44 PM ThreadID[1884] : Retrieving images from CONQUESTSRV1 started

*******************************************************

[1884] >> : c-find request for StudyInstanceUID: 1.2.840.113619.6.106.2294885607438502020627296462822907098891 initated

[DICOM SCU] >> : Connected to: 192.168.1.10:5678

[DICOM SCU] >> : Item Type: 2

[DICOM SCU] >> : Association Accept::ReadDynamic

[DICOM SCU] >> : Presentation Context Accept, Transfer Syntax: 1.2.840.10008.1.2

[1884] >> : c-find result: 1 sequences in study with UID 1.2.840.113619.6.106.2294885607438502020627296462822907098891

[1884] >> : c-move request for sequence 1.2.840.113619.2.364.65140653520588611400.1610028167.7890.0 initiated.

[DICOM SCU] >> : Connected to: 192.168.1.10:5678

[DICOM SCU] >> : Item Type: 2

[DICOM SCU] >> : Association Accept::ReadDynamic

[DICOM SCU] >> : Presentation Context Accept, Transfer Syntax: 1.2.840.10008.1.2

[DICOM SCU] >> : KPServer15 >> CONQUESTSRV1

[DICOM SCU] >> : (0000,0000), 4, UL, "94" - Group Length

[DICOM SCU] >> : (0000,0002), 28, UI, "1.2.840.10008.5.1.4.1.2.2.2" - Affected SOP Class UID

[DICOM SCU] >> : (0000,0100), 2, US, "33" - Command Field

[DICOM SCU] >> : (0000,0110), 2, US, "3" - Message ID

[DICOM SCU] >> : (0000,0600), 10, AE, "KPServer15" - Move Destination

[DICOM SCU] >> : (0000,0700), 2, US, "0" - Priority

[DICOM SCU] >> : (0000,0800), 2, US, "258" - Data Set Type

[DICOM SCU] >> :

[DICOM SCU] >> : KPServer15 >> CONQUESTSRV1

[DICOM SCU] >> : (0008,0021), 0, DA, "" - Series Date

[DICOM SCU] >> : (0008,0031), 0, TM, "" - Series Time

[DICOM SCU] >> : (0008,0052), 6, CS, "SERIES" - Query/Retrieve Level

[DICOM SCU] >> : (0008,0060), 0, CS, "" - Modality

[DICOM SCU] >> : (0008,103E), 0, LO, "" - Series Description

[DICOM SCU] >> : (0018,0015), 0, CS, "" - Body Part Examined

[DICOM SCU] >> : (0018,1030), 0, LO, "" - Protocol Name

[DICOM SCU] >> : (0018,5100), 0, CS, "" - Patient Position

[DICOM SCU] >> : (0020,000D), 62, UI, "1.2.840.113619.6.106.2294885607438502020627296462822907098891" - Study Instance UID

[DICOM SCU] >> : (0020,000E), 60, UI, "1.2.840.113619.2.364.65140653520588611400.1610028167.7890.0" - Series Instance UID

[DICOM SCU] >> : (0020,0011), 0, IS, "" - Series Number

[DICOM SCU] >> :

[DICOM SCU] >> : KPServer15 << CONQUESTSRV1

[DICOM SCU] >> : (0000,0000), 4, UL, "116" - Group Length

[DICOM SCU] >> : (0000,0002), 28, UI, "1.2.840.10008.5.1.4.1.2.2.2" - Affected SOP Class UID

[DICOM SCU] >> : (0000,0100), 2, US, "32801" - Command Field

[DICOM SCU] >> : (0000,0120), 2, US, "3" - Message ID Being Responded To

[DICOM SCU] >> : (0000,0800), 2, US, "257" - Data Set Type

[DICOM SCU] >> : (0000,0900), 2, US, "49157" - Status

[DICOM SCU] >> : (0000,1020), 2, US, "0" - Number of Remaining Sub-Operations

[DICOM SCU] >> : (0000,1021), 2, US, "0" - Number of Completed Sub-Operations

[DICOM SCU] >> : (0000,1022), 2, US, "0" - Number of Failed Sub-Operations

[DICOM SCU] >> : (0000,1023), 2, US, "0" - Number of Warning Sub-Operations

[DICOM SCU] >> :

[1884] >> : Error: retreive failed for Doe, Jane , Study: LE Angio/LE PTA , Sequence: 1

[1884] >> : c-move request for sequence 1.2.840.113619.2.364.65140653520588611400.1610028167.7890.1 initiated.

[DICOM SCU] >> : Connected to: 192.168.1.10:5678

[DICOM SCU] >> : Item Type: 2

[DICOM SCU] >> : Association Accept::ReadDynamic

[DICOM SCU] >> : Presentation Context Accept, Transfer Syntax: 1.2.840.10008.1.2

[DICOM SCU] >> : KPServer15 >> CONQUESTSRV1

[DICOM SCU] >> : (0000,0000), 4, UL, "94" - Group Length

[DICOM SCU] >> : (0000,0002), 28, UI, "1.2.840.10008.5.1.4.1.2.2.2" - Affected SOP Class UID

[DICOM SCU] >> : (0000,0100), 2, US, "33" - Command Field

[DICOM SCU] >> : (0000,0110), 2, US, "3" - Message ID

[DICOM SCU] >> : (0000,0600), 10, AE, "KPServer15" - Move Destination

[DICOM SCU] >> : (0000,0700), 2, US, "0" - Priority

[DICOM SCU] >> : (0000,0800), 2, US, "258" - Data Set Type

[DICOM SCU] >> :

[DICOM SCU] >> : KPServer15 >> CONQUESTSRV1

[DICOM SCU] >> : (0008,0021), 0, DA, "" - Series Date

[DICOM SCU] >> : (0008,0031), 0, TM, "" - Series Time

[DICOM SCU] >> : (0008,0052), 6, CS, "SERIES" - Query/Retrieve Level

[DICOM SCU] >> : (0008,0060), 0, CS, "" - Modality

[DICOM SCU] >> : (0008,103E), 0, LO, "" - Series Description

[DICOM SCU] >> : (0018,0015), 0, CS, "" - Body Part Examined

[DICOM SCU] >> : (0018,1030), 0, LO, "" - Protocol Name

[DICOM SCU] >> : (0018,5100), 0, CS, "" - Patient Position

[DICOM SCU] >> : (0020,000D), 62, UI, "1.2.840.113619.6.106.2294885607438502020627296462822907098891" - Study Instance UID

[DICOM SCU] >> : (0020,000E), 60, UI, "1.2.840.113619.2.364.65140653520588611400.1610028167.7890.1" - Series Instance UID

[DICOM SCU] >> : (0020,0011), 0, IS, "" - Series Number

[DICOM SCU] >> :

[DICOM SCU] >> : KPServer15 << CONQUESTSRV1

[DICOM SCU] >> : (0000,0000), 4, UL, "116" - Group Length

[DICOM SCU] >> : (0000,0002), 28, UI, "1.2.840.10008.5.1.4.1.2.2.2" - Affected SOP Class UID

[DICOM SCU] >> : (0000,0100), 2, US, "32801" - Command Field

[DICOM SCU] >> : (0000,0120), 2, US, "3" - Message ID Being Responded To

[DICOM SCU] >> : (0000,0800), 2, US, "257" - Data Set Type

[DICOM SCU] >> : (0000,0900), 2, US, "49157" - Status

[DICOM SCU] >> : (0000,1020), 2, US, "0" - Number of Remaining Sub-Operations

[DICOM SCU] >> : (0000,1021), 2, US, "0" - Number of Completed Sub-Operations

[DICOM SCU] >> : (0000,1022), 2, US, "0" - Number of Failed Sub-Operations

[DICOM SCU] >> : (0000,1023), 2, US, "0" - Number of Warning Sub-Operations

[DICOM SCU] >> :

[1884] >> : Error: retreive failed for Doe, Jane , Study: LE Angio/LE PTA , Sequence: 1

*******************************************************

1/8/2021 12:28:49 PM ThreadID[1884] : Closed.

I attached a snapshot of the server side.

Update, I downloaded a trial version of a different dicom viewer and it works like a charm. Glad it's not server having issues, but does anyone have any idea?

I also created a rule in firewall to accept any connection but same problem persists.

I am not getting any alerts from antivirus so I am assuming it's not the issue.

Hello,

using regular install of Conquest version 1.4.19c on a Win10 Pro, worked beautifully until this past week. For some reason I can no longer retrieve studies. Please notice the "Host 'KPServer' did not accept the connection" in the log.

To retrieve studies I I am using k-pacs 1.6.0. server and workstation are on the same network same subnet. I attached a snapshot from the error message I get on the workstation.

This is the debug log from the server:

[CONQUESTSRV1] UPACS THREAD 95: STARTED AT: Sat Sep 12 16:28:40 2020

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.1" 1

[CONQUESTSRV1] Server Command := 0020

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] (StudyRootQuery) search level: SERIES

[CONQUESTSRV1] Query On Series

[CONQUESTSRV1] Issue Query on Columns: DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta

[CONQUESTSRV1] Values: DICOMStudies.StudyInsta = '1.2.840.113619.2.284.3.2831159041.471.1597169437.621' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta

[CONQUESTSRV1] Tables: DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 6

[CONQUESTSRV1] C-Find (StudyRoot) located 6 records

[CONQUESTSRV1] UPACS THREAD 95: ENDED AT: Sat Sep 12 16:28:40 2020

[CONQUESTSRV1] UPACS THREAD 95: TOTAL RUNNING TIME: 0 SECONDS

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 96: STARTED AT: Sat Sep 12 16:28:40 2020

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

[CONQUESTSRV1] Server Command := 0021

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] C-Move Destination: "KPServer"

[CONQUESTSRV1] (QualifyOn) (mapped) IP:Server, PORT:Server

[CONQUESTSRV1] MyStudyRootRetrieveGeneric :: SearchOn

[CONQUESTSRV1] Query On Image

[CONQUESTSRV1] Issue Query on Columns: DICOMImages.SOPClassUI, DICOMImages.SOPInstanc, DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta,DICOMImages.ObjectFile,DICOMImages.DeviceName

[CONQUESTSRV1] Values: DICOMSeries.SeriesInst = '1.2.840.113619.2.284.3.2831159041.471.1597169437.623' and DICOMStudies.StudyInsta = '1.2.840.113619.2.284.3.2831159041.471.1597169437.621' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta and DICOMImages.SeriesInst = DICOMSeries.SeriesInst

[CONQUESTSRV1] Tables: DICOMImages, DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 2

[CONQUESTSRV1] Number of Images to send: 2

[CONQUESTSRV1] Host 'KPServer' did not accept the connection

[CONQUESTSRV1] C-Move (StudyRoot)

[CONQUESTSRV1] UPACS THREAD 96: ENDED AT: Sat Sep 12 16:28:43 2020

[CONQUESTSRV1] UPACS THREAD 96: TOTAL RUNNING TIME: 3 SECONDS

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 97: STARTED AT: Sat Sep 12 16:28:43 2020

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

[CONQUESTSRV1] Server Command := 0021

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] C-Move Destination: "KPServer"

[CONQUESTSRV1] (QualifyOn) (mapped) IP:Server, PORT:Server

[CONQUESTSRV1] MyStudyRootRetrieveGeneric :: SearchOn

[CONQUESTSRV1] Query On Image

[CONQUESTSRV1] Issue Query on Columns: DICOMImages.SOPClassUI, DICOMImages.SOPInstanc, DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta,DICOMImages.ObjectFile,DICOMImages.DeviceName

[CONQUESTSRV1] Values: DICOMSeries.SeriesInst = '1.2.840.113619.2.284.3.2831159041.471.1597169437.626' and DICOMStudies.StudyInsta = '1.2.840.113619.2.284.3.2831159041.471.1597169437.621' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta and DICOMImages.SeriesInst = DICOMSeries.SeriesInst

[CONQUESTSRV1] Tables: DICOMImages, DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 46

[CONQUESTSRV1] Number of Images to send: 46

[CONQUESTSRV1] Host 'KPServer' did not accept the connection

[CONQUESTSRV1] C-Move (StudyRoot)

[CONQUESTSRV1] UPACS THREAD 97: ENDED AT: Sat Sep 12 16:28:45 2020

[CONQUESTSRV1] UPACS THREAD 97: TOTAL RUNNING TIME: 2 SECONDS

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 98: STARTED AT: Sat Sep 12 16:28:45 2020

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

[CONQUESTSRV1] Server Command := 0021

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] C-Move Destination: "KPServer"

[CONQUESTSRV1] (QualifyOn) (mapped) IP:Server, PORT:Server

[CONQUESTSRV1] MyStudyRootRetrieveGeneric :: SearchOn

[CONQUESTSRV1] Query On Image

[CONQUESTSRV1] Issue Query on Columns: DICOMImages.SOPClassUI, DICOMImages.SOPInstanc, DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta,DICOMImages.ObjectFile,DICOMImages.DeviceName

[CONQUESTSRV1] Values: DICOMSeries.SeriesInst = '1.2.840.113619.2.284.3.2831159041.471.1597169437.626.5' and DICOMStudies.StudyInsta = '1.2.840.113619.2.284.3.2831159041.471.1597169437.621' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta and DICOMImages.SeriesInst = DICOMSeries.SeriesInst

[CONQUESTSRV1] Tables: DICOMImages, DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 20

[CONQUESTSRV1] Number of Images to send: 20

[CONQUESTSRV1] Host 'KPServer' did not accept the connection

[CONQUESTSRV1] C-Move (StudyRoot)

[CONQUESTSRV1] UPACS THREAD 98: ENDED AT: Sat Sep 12 16:28:48 2020

[CONQUESTSRV1] UPACS THREAD 98: TOTAL RUNNING TIME: 3 SECONDS

[CONQUESTSRV1]

[CONQUESTSRV1] UPACS THREAD 99: STARTED AT: Sat Sep 12 16:28:48 2020

[CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump

[CONQUESTSRV1] Calling Application Title : "KPServer"

[CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "

[CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384

[CONQUESTSRV1] Number of Proposed Presentation Contexts: 1

[CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1

[CONQUESTSRV1] Server Command := 0021

[CONQUESTSRV1] Message ID := 0003

[CONQUESTSRV1] C-Move Destination: "KPServer"

[CONQUESTSRV1] (QualifyOn) (mapped) IP:Server, PORT:Server

[CONQUESTSRV1] MyStudyRootRetrieveGeneric :: SearchOn

[CONQUESTSRV1] Query On Image

[CONQUESTSRV1] Issue Query on Columns: DICOMImages.SOPClassUI, DICOMImages.SOPInstanc, DICOMSeries.SeriesDate, DICOMSeries.SeriesTime, DICOMSeries.Modality, DICOMSeries.SeriesDesc, DICOMSeries.BodyPartEx, DICOMSeries.ProtocolNa, DICOMSeries.PatientPos, DICOMSeries.SeriesInst, DICOMSeries.SeriesNumb, DICOMStudies.StudyInsta,DICOMImages.ObjectFile,DICOMImages.DeviceName

[CONQUESTSRV1] Values: DICOMSeries.SeriesInst = '1.2.840.113619.2.80.977047112.25157.1599661686.1.4.1' and DICOMStudies.StudyInsta = '1.2.840.113619.2.284.3.2831159041.471.1597169437.621' and DICOMSeries.StudyInsta = DICOMStudies.StudyInsta and DICOMImages.SeriesInst = DICOMSeries.SeriesInst

[CONQUESTSRV1] Tables: DICOMImages, DICOMSeries, DICOMStudies

[CONQUESTSRV1] Records = 118

[CONQUESTSRV1] Number of Images to send: 118

[CONQUESTSRV1] Host 'KPServer' did not accept the connection

[CONQUESTSRV1] C-Move (StudyRoot)

[CONQUESTSRV1] UPACS THREAD 99: ENDED AT: Sat Sep 12 16:28:50 2020

[CONQUESTSRV1] UPACS THREAD 99: TOTAL RUNNING TIME: 2 SECONDS