Command line with ID patient

  • Bonjour,
    Je n'ai pas trouvé de réponse à mon problème (ou pas compris...).
    J'utilise Conquest DICOM server - version 1.4.14 avec succès à partir de mon logiciel médical. Je voudrai lancer en ligne de commande K-PACS avec comme paramètre, l'ID patient.
    Hello,
    I have not found an answer to my problem (or not included ...).
    I use Conquest DICOM server - version 1.4.14 successfully from my medical software. I would like to start a command line with K-PACS as a parameter, the patient ID.
    Thank you
    Regards.

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

  • Hi,


    there is an option in 1.4.16(rc4) to select the patient in conquest from the command line:


    dgate --browsepatient:patientID


    This may be close to what you need, from there you can select the built-in KPACS viewer. However, if you want to use K-PACS, you will need to contact them how to do this. To update, replace dgate.exe and conquestdicomserver.exe.


    Marcel

  • In fact, I use little KPAC. I am using a web viewer with AI viewer but sometimes I need to save an image to transfer to a correspondent. As I have not found (or not understand) this function, I use KPAC.
    Regards.


    ps : problem with 1.4.16(rc4) = worklist not working correctly.


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
    [CONQUESTSRV1] 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"
    [CONQUESTSRV1] 0000,0100 2 US CommandField 48
    [CONQUESTSRV1] 0000,0110 2 US MessageID 7
    [CONQUESTSRV1] 0000,0800 2 US DataSetType 257
    [CONQUESTSRV1] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
    [CONQUESTSRV1] 9999,0400 6 UN "silent"
    [CONQUESTSRV1] Connected by address: 1217a8c0
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #1 = '1.2.840.10008.1.2.4.50'
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #2 = '1.2.840.10008.1.2.4.51'
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #3 = '1.2.840.10008.1.2.4.53'
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #4 = '1.2.840.10008.1.2.4.55'
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #5 = '1.2.840.10008.1.2.4.57'
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #6 = '1.2.840.10008.1.2.4.70'
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
    [CONQUESTSRV1]
    [CONQUESTSRV1] UPACS THREAD 8: STARTED AT: Thu Feb 10 22:58:45 2011
    [CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump
    [CONQUESTSRV1] Calling Application Title : "V730 "
    [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
    [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 28672
    [CONQUESTSRV1] Number of Proposed Presentation Contexts: 1
    [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.31" 1
    [CONQUESTSRV1] Server Command := 0020
    [CONQUESTSRV1] Message ID := 0003
    [CONQUESTSRV1] 0000,0002 22 UI AffectedSOPClassUID "1.2.840.10008.5.1.4.31"
    [CONQUESTSRV1] 0000,0100 2 US CommandField 32
    [CONQUESTSRV1] 0000,0110 2 US MessageID 3
    [CONQUESTSRV1] 0000,0700 2 US Priority 0
    [CONQUESTSRV1] 0000,0800 2 US DataSetType 0
    [CONQUESTSRV1] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
    [CONQUESTSRV1] Connected by address: 0100007f
    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
    [CONQUESTSRV1] 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"
    [CONQUESTSRV1] 0000,0100 2 US CommandField 48
    [CONQUESTSRV1] 0000,0110 2 US MessageID 7
    [CONQUESTSRV1] 0000,0800 2 US DataSetType 257
    [CONQUESTSRV1] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
    [CONQUESTSRV1] 9999,0400 6 UN "silent"

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

  • I do not know if I have correctly made the handling of the patch ... I saved both files rcp and dgate in the directory and start the service stops when a echograph to use the worklist.


    [CONQUESTSRV1] Connected by address: 1117a8c0


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #0 = '1.2.840.10008.1.2'


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #1 = '1.2.840.10008.1.2.4.50'


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #2 = '1.2.840.10008.1.2.4.51'


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #3 = '1.2.840.10008.1.2.4.53'


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #4 = '1.2.840.10008.1.2.4.55'


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #5 = '1.2.840.10008.1.2.4.57'


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2.1' against list #6 = '1.2.840.10008.1.2.4.70'


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'


    [CONQUESTSRV1]


    [CONQUESTSRV1] UPACS THREAD 8: STARTED AT: Tue Feb 15 09:22:11 2011


    [CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump


    [CONQUESTSRV1] Calling Application Title : "V730 "


    [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "


    [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 28672


    [CONQUESTSRV1] Number of Proposed Presentation Contexts: 1


    [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.31" 1


    [CONQUESTSRV1] Server Command := 0020


    [CONQUESTSRV1] Message ID := 0000


    [CONQUESTSRV1] 0000,0002 22 UI AffectedSOPClassUID "1.2.840.10008.5.1.4.31"


    [CONQUESTSRV1] 0000,0100 2 US CommandField 32


    [CONQUESTSRV1] 0000,0110 2 US MessageID 0


    [CONQUESTSRV1] 0000,0700 2 US Priority 0


    [CONQUESTSRV1] 0000,0800 2 US DataSetType 0


    [CONQUESTSRV1] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"


    [CONQUESTSRV1] Connected by address: 0100007f


    [CONQUESTSRV1] Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'


    [CONQUESTSRV1] 0000,0002 18 UI AffectedSOPClassUID "1.2.840.10008.1.1"


    [CONQUESTSRV1] 0000,0100 2 US CommandField 48


    [CONQUESTSRV1] 0000,0110 2 US MessageID 7


    [CONQUESTSRV1] 0000,0800 2 US DataSetType 257


    [CONQUESTSRV1] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"


    [CONQUESTSRV1] 9999,0400 6 UN "silent"

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

  • Hi Alain,


    this is what I get when I do a worklist query from within the conquest server. Apparantly your US machine is not requesting any worklist query data (the bold lines are missing) - and hence it gets nothing back. What I wonder is which version of conquest works with that machine, and if any, what the log looks like.


    Thanks,


    Marcel


    Connected by address: 0100007f
    Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
    Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
    Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'
    Testing transfer: '1.2.840.10008.1.2' against list #0 = '1.2.840.10008.1.2'


    UPACS THREAD 5: STARTED AT: Wed Feb 16 21:09:04 2011
    A-ASSOCIATE-RQ Packet Dump
    Calling Application Title : "CONQUESTSRV1 "
    Called Application Title : "CONQUESTSRV1 "
    Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384
    Number of Proposed Presentation Contexts: 4
    Presentation Context 0 "1.2.840.10008.5.1.4.1.2.1.1" 1
    Presentation Context 1 "1.2.840.10008.5.1.4.1.2.2.1" 1
    Presentation Context 2 "1.2.840.10008.5.1.4.1.2.3.1" 1
    Presentation Context 3 "1.2.840.10008.5.1.4.31" 1
    Server Command := 0020
    Message ID := 0003
    0000,0002 24 UI AffectedSOPClassUID "1.2.840.10008.5.1.4.31"
    0000,0100 2 US CommandField 32
    0000,0110 2 US MessageID 3
    0000,0700 2 US Priority 0
    0000,0800 2 US DataSetType 258
    0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
    (ModalityWorkListQuery) search level:
    0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"
    0008,0050 0 SH AccessionNumber (empty)
    0008,0052 0 CS QueryRetrieveLevel (empty)
    0010,0010 0 PN PatientName (empty)
    0010,0020 8 LO PatientID "20504567"

    Query On Modality WorkList
    ....
    First record of cleaned response:
    0008,0005 10 CS SpecificCharacterSet "ISO_IR 100"
    0008,0050 10 SH AccessionNumber "2005-9999 "
    0008,1110 0 SQ ReferencedStudySeque Sequence Item
    0008,1120 0 SQ ReferencedPatientSeq Sequence Item
    0010,0010 12 PN PatientName "Zijp^Lambert"
    0010,0020 8 LO PatientID "20504567"
    C-Find (Modality Work List) located 1 records
    UPACS THREAD 5: ENDED AT: Wed Feb 16 21:09:04 2011
    UPACS THREAD 5: TOTAL RUNNING TIME: 0 SECONDS

  • Bonjour et merci de votre aide.


    J'utilise la version 1.4.14 sans problème.


    [CONQUESTSRV1] UPACS THREAD 105: STARTED AT: Thu Feb 17 21:04:08 2011
    [CONQUESTSRV1] A-ASSOCIATE-RQ Packet Dump
    [CONQUESTSRV1] Calling Application Title : "V730 "
    [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
    [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 28672
    [CONQUESTSRV1] Number of Proposed Presentation Contexts: 1
    [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.31" 1
    [CONQUESTSRV1] Server Command := 0020
    [CONQUESTSRV1] Message ID := 0004
    [CONQUESTSRV1] 0000,0002 22 UI AffectedSOPClassUID "1.2.840.10008.5.1.4.31"
    [CONQUESTSRV1] 0000,0100 2 US CommandField 32
    [CONQUESTSRV1] 0000,0110 2 US MessageID 4
    [CONQUESTSRV1] 0000,0700 2 US Priority 0
    [CONQUESTSRV1] 0000,0800 2 US DataSetType 0
    [CONQUESTSRV1] (ModalityWorkListQuery) search level:
    [CONQUESTSRV1] 0008,0050 0 SH AccessionNumber (empty)
    [CONQUESTSRV1] 0008,0090 0 PN ReferringPhysicianNa (empty)
    [CONQUESTSRV1] 0008,1110 0 SQ ReferencedStudySeque Sequence Item
    [CONQUESTSRV1] >0008,1150 0 UI ReferencedSOPClassUI (empty)
    [CONQUESTSRV1] >0008,1155 0 UI ReferencedSOPInstanc (empty)
    [CONQUESTSRV1] 0008,1120 0 SQ ReferencedPatientSeq Sequence Item
    [CONQUESTSRV1] >0008,1150 0 UI ReferencedSOPClassUI (empty)
    [CONQUESTSRV1] >0008,1155 0 UI ReferencedSOPInstanc (empty)
    [CONQUESTSRV1] 0010,0010 6 PN PatientName ""
    [CONQUESTSRV1] 0010,0020 0 LO PatientID (empty)
    [CONQUESTSRV1] 0010,0030 0 DA PatientBirthDate (empty)
    [CONQUESTSRV1] 0010,0040 0 CS PatientSex (empty)
    [CONQUESTSRV1] 0010,1020 0 DS PatientSize (empty)
    [CONQUESTSRV1] 0010,1030 0 DS PatientWeight (empty)
    [CONQUESTSRV1] 0010,21d0 0 DA LastMenstrualDate (empty)
    [CONQUESTSRV1] 0020,000d 0 UI StudyInstanceUID (empty)
    [CONQUESTSRV1] 0032,1032 0 PN RequestingPhysician (empty)
    [CONQUESTSRV1] 0032,1060 0 LO RequestedProcedureDe (empty)
    [CONQUESTSRV1] 0032,1064 0 SQ RequestedProcedureCo Sequence Item
    [CONQUESTSRV1] >0008,0100 0 SH CodeValue (empty)
    [CONQUESTSRV1] >0008,0102 0 SH CodingSchemeDesignat (empty)
    [CONQUESTSRV1] >0008,0104 0 LO CodeMeaning (empty)
    [CONQUESTSRV1] 0038,0010 0 LO AdmissionID (empty)
    [CONQUESTSRV1] 0040,0100 0 SQ ScheduledProcedureSt Sequence Item
    [CONQUESTSRV1] >0008,0060 2 CS Modality "US"
    [CONQUESTSRV1] >0040,0001 0 AE ScheduledStationAETi (empty)
    [CONQUESTSRV1] >0040,0002 18 DA ScheduledProcedureSt "20110217-20110217 "
    [CONQUESTSRV1] >0040,0003 0 TM ScheduledProcedureSt (empty)
    [CONQUESTSRV1] >0040,0006 0 PN ScheduledPerformingP (empty)
    [CONQUESTSRV1] >0040,0007 0 LO ScheduledProcedureSt (empty)
    [CONQUESTSRV1] >0040,0008 0 SQ ScheduledProcedureSt Sequence Item
    [CONQUESTSRV1] >0040,0009 0 SH ScheduledProcedureSt (empty)
    [CONQUESTSRV1] 0040,1001 0 SH RequestedProcedureID (empty)
    [CONQUESTSRV1] Query On Modality WorkList
    [CONQUESTSRV1] Failed on VR Search: 0008 0090
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0008 1150
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0008 1155
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0008 1150
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0008 1155
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0010 1020
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0010 1030
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0008 0100
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0008 0102
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0008 0104
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Failed on VR Search: 0038 0010
    [CONQUESTSRV1] (testing phase) - ignored
    [CONQUESTSRV1] Issue Query on Columns: DICOMWorkList.AccessionN, DICOMWorkList.PatientNam, DICOMWorkList.PatientID, DICOMWorkList.PatientBir, DICOMWorkList.PatientSex, DICOMWorkList.LastMenstr, DICOMWorkList.StudyInsta, DICOMWorkList.ReqPhysici, DICOMWorkList.ReqProcDes, DICOMWorkList.Modality, DICOMWorkList.ScheduledA, DICOMWorkList.StartDate, DICOMWorkList.StartTime, DICOMWorkList.PerfPhysic, DICOMWorkList.SchedPSDes, DICOMWorkList.SchedPSID, DICOMWorkList.ReqProcID
    [CONQUESTSRV1] Values: DICOMWorkList.PatientNam LIKE 'coman%' and DICOMWorkList.Modality = 'US' and DICOMWorkList.StartDate >= '20110217' and DICOMWorkList.StartDate <= '20110217'
    [CONQUESTSRV1] Tables: DICOMWorkList
    [CONQUESTSRV1] Sorting (DICOMWorkList.PatientNam) DoSort := 1
    [CONQUESTSRV1] Query Distinct Tables: DICOMWorkList
    [CONQUESTSRV1] Columns : DICOMWorkList.AccessionN, DICOMWorkList.PatientNam, DICOMWorkList.PatientID, DICOMWorkList.PatientBir, DICOMWorkList.PatientSex, DICOMWorkList.LastMenstr, DICOMWorkList.StudyInsta, DICOMWorkList.ReqPhysici, DICOMWorkList.ReqProcDes, DICOMWorkList.Modality, DICOMWorkList.ScheduledA, DICOMWorkList.StartDate, DICOMWorkList.StartTime, DICOMWorkList.PerfPhysic, DICOMWorkList.SchedPSDes, DICOMWorkList.SchedPSID, DICOMWorkList.ReqProcID
    [CONQUESTSRV1] Where : DICOMWorkList.PatientNam LIKE 'coman%' and DICOMWorkList.Modality = 'US' and DICOMWorkList.StartDate >= '20110217' and DICOMWorkList.StartDate <= '20110217'
    [CONQUESTSRV1] Order : DICOMWorkList.PatientNam
    [CONQUESTSRV1] 0008,0050 6 SH AccessionNumber "994139"
    [CONQUESTSRV1] Coding sequence (0008,1110), level=1
    [CONQUESTSRV1] (sequence is empty)
    [CONQUESTSRV1] Coding sequence (0008,1120), level=1
    [CONQUESTSRV1] (sequence is empty)
    [CONQUESTSRV1] 0010,0010 14 PN PatientName ""
    [CONQUESTSRV1] 0010,0020 6 LO PatientID "32910 "
    [CONQUESTSRV1] 0010,0030 8 DA PatientBirthDate "19730625"
    [CONQUESTSRV1] 0010,0040 2 CS PatientSex "F "
    [CONQUESTSRV1] 0010,21d0 8 DA LastMenstrualDate "20100709"
    [CONQUESTSRV1] 0020,000d 0 UI StudyInstanceUID ""
    [CONQUESTSRV1] 0032,1032 0 PN RequestingPhysician ""
    [CONQUESTSRV1] 0032,1060 0 LO RequestedProcedureDe ""
    [CONQUESTSRV1] Coding sequence (0032,1064), level=1
    [CONQUESTSRV1] (sequence is empty)
    [CONQUESTSRV1] Coding sequence (0040,0100), level=1
    [CONQUESTSRV1] 0008,0060 2 CS Modality "US"
    [CONQUESTSRV1] 0040,0001 0 AE ScheduledStationAETi ""
    [CONQUESTSRV1] 0040,0002 8 DA ScheduledProcedureSt "20110217"
    [CONQUESTSRV1] 0040,0003 0 TM ScheduledProcedureSt ""
    [CONQUESTSRV1] 0040,0006 0 PN ScheduledPerformingP ""
    [CONQUESTSRV1] 0040,0007 0 LO ScheduledProcedureSt ""
    [CONQUESTSRV1] Coding sequence (0040,0008), level=2
    [CONQUESTSRV1] (sequence is empty)
    [CONQUESTSRV1] 0040,0009 0 SH ScheduledProcedureSt ""
    [CONQUESTSRV1] 0040,1001 0 SH RequestedProcedureID ""
    [CONQUESTSRV1] Records = 1
    [CONQUESTSRV1] First record of cleaned response:
    [CONQUESTSRV1] 0008,0005 10 CS SpecificCharacterSet "ISO IR_100"
    [CONQUESTSRV1] 0008,0050 6 SH AccessionNumber "994139"
    [CONQUESTSRV1] 0008,1110 0 SQ ReferencedStudySeque Sequence Item
    [CONQUESTSRV1] 0008,1120 0 SQ ReferencedPatientSeq Sequence Item
    [CONQUESTSRV1] 0010,0010 14 PN PatientName ""
    [CONQUESTSRV1] 0010,0020 6 LO PatientID "32910 "
    [CONQUESTSRV1] 0010,0030 8 DA PatientBirthDate "19730625"
    [CONQUESTSRV1] 0010,0040 2 CS PatientSex "F "
    [CONQUESTSRV1] 0010,21d0 8 DA LastMenstrualDate "20100709"
    [CONQUESTSRV1] 0020,000d 0 UI StudyInstanceUID ""
    [CONQUESTSRV1] 0032,1032 0 PN RequestingPhysician ""
    [CONQUESTSRV1] 0032,1060 0 LO RequestedProcedureDe ""
    [CONQUESTSRV1] 0032,1064 0 SQ RequestedProcedureCo Sequence Item
    [CONQUESTSRV1] 0040,0100 0 SQ ScheduledProcedureSt Sequence Item
    [CONQUESTSRV1] >0008,0060 2 CS Modality "US"
    [CONQUESTSRV1] >0040,0001 0 AE ScheduledStationAETi ""
    [CONQUESTSRV1] >0040,0002 8 DA ScheduledProcedureSt "20110217"
    [CONQUESTSRV1] UPACS THREAD 105: ENDED AT: Thu Feb 17 21:04:09 2011
    [CONQUESTSRV1] UPACS THREAD 105: TOTAL RUNNING TIME: 1 SECONDS

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

  • Hm Alain,


    as I read your log the worklist query "hangs" directly after:


    [CONQUESTSRV1] 0002,0010 17 UI TransferSyntaxUID "1.2.840.10008.1.2"


    The rest of the log is when you control debug logging?


    Marcel

  • Hi,


    I cannot see any reason why this happens. Would you mind trying a couple of different dgate.exe versions to narrow down which version change broke this? Just download the zips and extract and stop, replace the dgate.exe in your test server, start and test to see where the worklist query stops working.


    In ftp://ftp-rt.nki.nl/outbox/marcelvanherk/dicomserver


    Please try:


    dicomserver1415.zip
    dicomserver1416alpha.zip
    dicomserver1416beta.zip
    dicomserver1416rc2.zip
    dicomserver1416rc4.zip
    1416rc4b_update.zip


    Thanks,


    Marcel

  • Hi,


    dicomserver1415 is OK
    dicomserver1416alpha is OK
    dicomserver1416beta is OK
    [CONQUESTSRV1] UPACS THREAD 0: STARTED AT: Mon Feb 21 22:24:07 2011
    [CONQUESTSRV1] Calling Application Title : "V730 "
    [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
    [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 28672
    [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.31" 1
    [CONQUESTSRV1] (ModalityWorkListQuery) search level:
    [CONQUESTSRV1] C-Find (Modality Work List) located 1 records
    [CONQUESTSRV1] UPACS THREAD 0: ENDED AT: Mon Feb 21 22:24:07 2011
    [CONQUESTSRV1] UPACS THREAD 0: TOTAL RUNNING TIME: 0 SECONDS


    dicomserver1416rc2 is not OK
    [CONQUESTSRV1]
    [CONQUESTSRV1] UPACS THREAD 0: STARTED AT: Mon Feb 21 22:18:28 2011
    [CONQUESTSRV1] Calling Application Title : "V730 "
    [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
    [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 28672
    [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.31" 1


    I have not tried :
    dicomserver1416rc4.zip
    1416rc4b_update.zip


    Thanks,


    Alain

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

  • hello
    I use MYSQL.
    We modified the file dicom.sql to add the line "LastMenstrualDate" but I do not know if it related to this problem.


    dicomserver_update_1416beta4 is OK


    Thanks

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

  • bonsoir,

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

  • Hi,


    could you also inject this code in dicom.ini to add some logging of the failed worklist query, and give me the log. You need the dgate of 1.4.16rc4b.


    Marcel


    [lua]
    startup = print('lua startup');
    association = print('lua association', Association.Calling, Association.Called);
    command = print('lua command', Command.CommandField, Command.MessageID, Command.DataSetType);


    WorkListQueryConverter0 = print('lua WorkListQuery', Data.PatientID);
    ModalityWorkListQueryResultConverter0 = print('lua ModalityWorkListQueryResult', Data.PatientID);


    QueryConverter0 = print('lua Query', Data.QueryRetrieveLevel, Data.PatientID);
    RetrieveConverter0 = print('lua Retrieve', Data.QueryRetrieveLevel, Data.PatientID);
    RetrieveResultConverter0 = print('lua RetrieveResult', Data.PatientID);
    QueryResultConverter0 = print('lua QueryResult', Data.PatientID);
    MergeSeriesConverter0 = print('lua MergeSeries');
    MergeStudiesConverter0 = print('lua MergeStudies');
    ArchiveConverter0 = print('lua Archive');
    MoveDeviceConverter0 = print('lua MoveDevice');
    CompressionConverter0 = print('lua Compression');
    ImportConverter0 = print('lua Import', Data.PatientID);

  • Hi,
    I'm sorry, I was absent a few days ...


    After modifying the file dicom.ini:


    [CONQUESTSRV1] lua association CONQUESTSRV1 CONQUESTSRV1
    [CONQUESTSRV1] lua command userdata:010F0680 userdata:010F0198 userdata:010EFD88
    [CONQUESTSRV1]
    [CONQUESTSRV1] UPACS THREAD 2: STARTED AT: Mon Mar 07 20:43:49 2011
    [CONQUESTSRV1] Calling Application Title : "V730 "
    [CONQUESTSRV1] Called Application Title : "CONQUESTSRV1 "
    [CONQUESTSRV1] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 28672
    [CONQUESTSRV1] Presentation Context 0 "1.2.840.10008.5.1.4.31" 1
    [CONQUESTSRV1] lua WorkListQuery userdata:010E31D0
    [CONQUESTSRV1] lua association CONQUESTSRV1 CONQUESTSRV1
    [CONQUESTSRV1] lua command userdata:010EEB10 userdata:010EEDE0 userdata:010EEF78
    [CONQUESTSRV1] lua association CONQUESTSRV1 CONQUESTSRV1
    [CONQUESTSRV1] lua command userdata:010E7DB8 userdata:010E8288 userdata:010E8630
    [CONQUESTSRV1] lua association CONQUESTSRV1 CONQUESTSRV1
    [CONQUESTSRV1] lua command userdata:010E4128 userdata:010E3908 userdata:010E3660
    [CONQUESTSRV1] lua association CONQUESTSRV1 CONQUESTSRV1
    [CONQUESTSRV1] lua command userdata:010EA150 userdata:010E97B8 userdata:010E9390
    [CONQUESTSRV1] lua association CONQUESTSRV1 CONQUESTSRV1
    [CONQUESTSRV1] lua command userdata:010E9400 userdata:010EA5E0 userdata:010E9AC0


    the worklist query from the GUI?


    SpecificCharacterSet AccessionNumber QueryRetrieveLevel ReferencedStudySequence ReferencedPatientSequence PatientName PatientID
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------
    [ISO_IR 100] [1007318 ] (empty) (empty) (empty) [GARBO^Marlène ] [18566 ]
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------
    Total of 1 item(s) found

    Alain Godard Châtellerault France. Je parle très mal anglais et je ne suis pas informaticien. Soyez indulgent :)

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!